Thread: Model 7 7mm08 150gn eldx load development

Hi Danny I'm using Laupa brass in the 7-08 I'm working a load for at the moment.
I'm using 2308 and 150 ELDX from a 20" Tikka seated to mag length.
I did a ladder last night and went up to 40.6 with that giving me 2726fps but a slight stamp and some weight on bolt lift.
I've loaded 10 of each 40 and 40.2 as both were around 2675fps and showing no pressure. So I'll shoot them for groups when the rain stops probably tomorrow night.

Sent from my CPH1903 using Tapatalk