You would win that bet @Rushy
Printable View
You would win that bet @Rushy
wasn't Ernie the short arse one ?
Get hold of a case trimmer. Can't remember if it is the lyman or lee. Put the rod down the case and tap the primer out. Otherwise take the decapping pin out of your die and use it to tap the primer out. Be gentle.
http://uploads.tapatalk-cdn.com/2016...336262ec74.jpg
Sent from my SM-G388F using Tapatalk
I've de-primed quite a few live primers with sizing die, never had one go off.
Put the handle in a vice & tap it out with the stem out of your die, if you can take the shell holder & stuck case out of the hand primer you might be able to twist the primer out with some needle nose pliers?
Hey Pengy did you get any of my PM's whilst travelling. And yes I agree with Rushy, possibly mot the first time you have fucked up.
Ernie? Should be Dick?, got it out yet? You could of course use it as an excuse to purchase a whole new set up?:thumbsup:
Tip of a chainsaw file works well for most things if it's out of the press
Pengy what type of priming tool are you using?
Is there a way to disassemble the handprimer to pull the push-rod out from underneath?
I got the primer our easy as , by putting case in a vice and gently tapping through with de capping rod out of the die. Cheers all