Nice brass, pretty big case with a fairly small hole :)
Here it is next to a 7 Rum case
http://i1004.photobucket.com/albums/...pssgsntfgw.jpg
Printable View
Nice brass, pretty big case with a fairly small hole :)
Here it is next to a 7 Rum case
http://i1004.photobucket.com/albums/...pssgsntfgw.jpg
Nice, is there a reamer in NZ Greg?
That is a handsome case
No change of heart but ever since I first heard about the 26 Nosler I have thought that's a bit of me
Never owned a 7mm in my life, don't intend to start now.
Edit: actually, I owned a 7RM breifly, sold it unfired..
There's a set of 26 Nosler reamers on trademe.. $425 reserve.
Wonder if this cal would be a case of "allow one fresh barrel per range session"
What's the brass worth?
Anyone wanna go halves on the reamers? I have heard reports of 1000 rounds barrel life, but thats plenty of hunting even after load development. 143 eld would have a fair bit of sting out to a fairly long way....
What powder would you use in the throat burner? Similar to the other 6.5 magnums @Kiwi Greg ?
There's some on tardme atm
Other | Firearm parts | Trade Me
Technoclutz
Btw, serious if someone wants to share costs on getting the reamers...
they fit in a short action?
Probably have to remove the bolt to extract an unfired round also
Just seen they released the 33 Nosler. Claiming better than the 338 lap
Attachment 58147
Will the 26 Nosler actually give you much over a 264 Win Mag?
The 28 Nosler makes a lot of sense if you can seat the pills out a ways and have a long throat.
What about a 257 Nosler? Beat the Weatherby by a bit I reckon... 80 TTSX at 4k plus....
http://uploads.tapatalk-cdn.com/2016...6805dbfc3e.jpg
Sent from my SM-G935F using Tapatalk
Neck this bad boy down to 7mm @Kiwi Greg
http://uploads.tapatalk-cdn.com/2016...f022fe0c11.jpg
Sent from my SM-G930F using Tapatalk
Hes a member on here brads, swamplord i think
Used in a super light rifle these Nosler chamberings have a lot of merit if your chosen projectile allows the ammo to be mag fed---and that's a big $$$$$ if
I can't see the point yet with the 338 variant
When you take away the fact that the illustration/advert is using a 225g accubond and start using a decent LR projectile the story changes dramatically.
33 Nosler........300g elite hunter projectile..........26 inch barrel......... 2750fps
338 lapua. 300grainer. 24 inch barrel. 2850fps
338 Edge. 300grainer. 24 inch barrel. 2900fps
Then further still if you AI the 338 Lapua it becomes something quite special
It's simply due to case capacity, and the 33 Nosler Has the least powder capacity of the bunch, -and is just a chambering that hasn't had the Edge reamer pushed in far enough yet :)