Thread: Primer failure rate.

https://youtu.be/ZgKbSJ5PLwI
This guy uses the same press and his method seems to make sense to me.
I could keep the fired round and the fl resized cases from the previous post as reference.
@Micky Duck doing it 4 or 5 times, i meant it as you'd be constantly adjusting the die and case. So consistently working the brass and hardening it before getting it to the right bump distance. That would mean the brass will be harder to reshape and then spring back each adjustment of the resizing die and you'd need to over sizing the die. This would mean the 2nd piece of brass sized will be vastly different than the 1st piece sized as it hasn't been as worked.

Does that make sense?

Sent from my SM-G780G using Tapatalk