Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Results 1 to 10 of 10
Like Tree7Likes
  • 1 Post By ZQLewis
  • 1 Post By 338MAN mk2
  • 2 Post By 338MAN mk2
  • 1 Post By PerazziSC3
  • 2 Post By PerazziSC3

Thread: Reloading for 338federal

  1. #1
    Member
    Join Date
    May 2018
    Location
    wellington
    Posts
    1,749

    Reloading for 338federal

    So, I'm about to start reloading for my 338 federal,

    18 inch barrel, and have some cutting edge maximus 175gr for supersonic load, and 280gr peregrine for subsonic load.

    I have on hand rl17, rl15, lilgun, n110, - has anyone loaded this cal here that has a good powder for around a 175gr projectile ? Was thinking the better powder would be 2206h or h332 ? Any real world experience ?

    Would like to be round 2600-2700 for the 175gr super load - planning on shooting out to 400m.

    And the subload I was obviously going to aim for 1050fps probably with the n110 powder out to 150ish metres.

    And I have some federal 210 primers sitting here to use.

  2. #2
    Member
    Join Date
    Jul 2017
    Location
    Whangarei
    Posts
    1,112
    you are going to get one hell of drop at 150 mtr.
    In my 358 win I run a 220 gr lead hp sub sonic but would not use them past 50 mtr due to the drop.
    I then run a pistol 158 gr HP at 1650 fps and then my full loads 225gr at >2400 fps. I don't change my point of aim.

    at 50mtr the subs are 4-6" low, the 158gr are at zero, and the 225gr are 2" high.
    I used Trail-boss for the subs and pistol bullets, then Varget (2208) for the full power loads.

    My experience is that the subsonic tends to just drill a hole and are not that great apart for use as a point blank finishing shoot.
    Did drill a sika hind earlier this year with a sub sonic but I think the pistol bullets are more effective. (mostly used on goats)
    Z
    Last edited by ZQLewis; 29-12-2023 at 06:38 PM.
    Micky Duck likes this.

  3. #3
    Member
    Join Date
    Jan 2020
    Location
    Tokoroa
    Posts
    69
    45gr of AR2219 behind the 180gr Accu-bond is my favorite load. 2600fps from 17" barrel.
    Larskramer likes this.

  4. #4
    Member
    Join Date
    May 2018
    Location
    wellington
    Posts
    1,749
    That sounds pretty good, I was going to run 175 cutting edge as have heaps of them - get a normal super load going with these then when I can be bothered do a sub load. But 2219 seems to be good speeds with the 180gr.

  5. #5
    Member
    Join Date
    Jan 2020
    Location
    Tokoroa
    Posts
    69
    Another good super load bullet is the 160gr TTSX.
    With the subs i tried 315gr soft cast. While they didn't group too well they were acceptable but poi too sideways from super load.
    The 300gr sierra mk would group 1" @ 100 and in line so just used ballistic reticle to lob them in. These would tumble inside like the wisper guys said but erratically often at 90deg off coarse. I hollowed them and got better kills but not by much.
    The Lehigh controlled fractioning were the best i used. These would open up well, either cutting like a broadhead or breaking off the petals like buckshot.
    1-9" twist barrel is needed for the subs unless you find a short bullet that groups.
    Trailboss powder was easy to load but i got better results from the same weight of AR2205 and a dacron packer.
    Probably the best advice for subs is neck tension. My loads really came good after annealing.
    Hopefully i dont start a punch up with guys who don't agree with my results. Take from it what you want
    308 and Micky Duck like this.

  6. #6
    Member
    Join Date
    May 2018
    Location
    wellington
    Posts
    1,749
    Any real world results are awesome.to hear. I have about 100 peregrine subs still, 280gr. So I'll try them when it comes to a sub load. Would be great for bush stalking etc. Especially during the roar. Switch out to the sub load etc whe ready.

  7. #7
    Member
    Join Date
    Aug 2012
    Location
    Christchurch
    Posts
    4,487
    Quote Originally Posted by Larskramer View Post
    Any real world results are awesome.to hear. I have about 100 peregrine subs still, 280gr. So I'll try them when it comes to a sub load. Would be great for bush stalking etc. Especially during the roar. Switch out to the sub load etc whe ready.
    During the roar would be the worst time to use sub sonics
    Micky Duck likes this.

  8. #8
    Member
    Join Date
    May 2018
    Location
    wellington
    Posts
    1,749
    And why would that be ?

  9. #9
    Member
    Join Date
    Aug 2012
    Location
    Christchurch
    Posts
    4,487
    Quote Originally Posted by Larskramer View Post
    And why would that be ?
    Just don’t see the point, not targeting multiple animals in close proximity so silence doesn’t matter…

    Stags are usually a bit harder to kill in roar so why limit yourself with subs?

    I don’t have real world experience with a 338fed using subs but have used cast irons and subx in 308, certainly wouldn’t use them in the roar and risk losing a stag of a lifetime, if I wanted to make it more difficult on myself I would take the bow
    Micky Duck and 338MAN mk2 like this.

  10. #10
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    23,059
    actually taking the bow is VERY VERY relevant comparison...as an arrow and a subsonic projectile are just about identical in how they kill...next to no shock ,just a pathway cut through.....the bigger the pathway the faster the bleeding...subs in central nervous system are or course different kettle of fish but one would guess an arrow in same place would be too. using either,a slight miss of your mark will make a long messy tracking job or wounded animal getting away.
    75/15/10 black powder matters

 

 

Similar Threads

  1. Starting reloading- wtb reloading gear
    By CP270 in forum Reloading and Ballistics
    Replies: 7
    Last Post: 23-11-2023, 12:41 PM
  2. Reloading course
    By janleroux in forum Reloading and Ballistics
    Replies: 8
    Last Post: 25-03-2019, 05:51 PM
  3. Reloading for .223
    By planenutz in forum Reloading and Ballistics
    Replies: 43
    Last Post: 24-02-2019, 07:21 AM
  4. 270 reloading
    By geezejonesy in forum Reloading and Ballistics
    Replies: 9
    Last Post: 09-02-2016, 03:02 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!