Where the magic happens.....
Attachment 58
Printable View
Where the magic happens.....
Attachment 58
The "Man corner" of my garage, currently set up for shotgun, switch back to metallic closer to the hard antler.........................
Attachment 71
Got kicked out of the spare bedroom when the 1st baby arrived... Good enough reason to build this (and as you can see, I don't have anyone nagging at me to keep it clean...)
http://i237.photobucket.com/albums/f...9-22170722.jpg
http://i237.photobucket.com/albums/f...9-22170543.jpg
http://i237.photobucket.com/albums/f...9-22170618.jpg
http://i237.photobucket.com/albums/f...9-22170555.jpg
http://i237.photobucket.com/albums/f...9-22170604.jpg
Shifting it in a couple of weeks to our new place. The wife thought I would just leave it at our old place...
Couple of additions when we shift will be the old Pioneer/Wharfedale stereo we are replacing in the house, and the little beer fridge that no longer required in the new place either... I'll be a pig in shit then!
http://i222.photobucket.com/albums/d...-54-30_993.jpg
http://i222.photobucket.com/albums/d...-56-05_500.jpg
Not as tidy as you lot but it gets it done....when I get the time.
i have just finished this i got sick of moving stuff so i could load so got a full time bench built bloody handy to
cheers john
Attachment 100
Whats with the red circle's in ya pic Gav, Is that so you do'nt forget where you put stuff :pacman:
Heres my set up :slow: not the best as it doubles as a work bench, but it does have a decent sound system & a place to sit my beer :grin:
http://i301.photobucket.com/albums/n...y/DSCF6686.jpg
G'Day Fella's,
Here is an image of my re-loading set-up!
Bit of a mess hey! Crap every where!!!
It has had a bit of a tidy up since this image was taken and I also have a bullet trap beside the bench.
Attachment 140
From left the presses are an RCBS 4x4 progressive, a Dillon 550B, a Redding Ultramag, a Redding Turret and a MEC 650 seedgun press.
All the different colored plastic boxes above the bench top, are for cartridge cases. there's a Yellow and Blue box for each different rifle cartridge.
all the fired cases go into the Yellow boxes.
When they have been resized, they go into the Blue boxes ready for loading up (the Three P's, Primer, Powder and Pill)
The Clear and Blue colored boxes on the left, are for pistol cartridges.
Doh!
Homer
Impressive setup there Homer!!!
Its an old photo Philpo, not even how its setup now, I dont even have those presses now. Just put it up till I cleaned up the bench now and took a new pic:innocent:
Not got a breakpress setup get crzy?
PM me your address and I'll stop in when I'm over.
Heres mine.
Beer fridge, computer with internet and speakers/radio :) Bench, and storage, its also where I play cards and store all my stuff :)
http://iforce.co.nz/i/iqn2j0sa.ult.jpg
http://iforce.co.nz/i/t1dwvbex.jhz.jpg
http://iforce.co.nz/i/ynrgc55a.1eh.jpg
http://iforce.co.nz/i/paulq3gn.xqx.jpg
Why do you have a Mosin and a Lee-Enfield hanging on your wall?
Revised question: Why do you have a Mosin??
Its on trademe (met reserve), as is the enfield. It was a cheap fun bang stick. Its on the wall as it doesn't fit in the safe.
Mine isn't as elaborate as some but it gets the job done.
Attachment 238
Hi guys, this is my reloading bench, it WAS my kids change table, a few slight mods, and voila!
Attachment 246
Attachment 247
It's only little, but i only have 'little guns!
Attachment 248
Attachment 249
... and part of the 'Cave!
Attachment 250
That is bad ass!
Birthday today! just added a nice tumbler kit to the setup!
Will set it up and try it tonight!
This is my TEMP setup while in apartment
My Mrs 'cleans up' my stuff around the house when I'm away and puts it all on the table lol
Its a tip at the moment! Dont have any of my single stages setup.
Have a dozen 30 and 50 cal ammo tins int he cupboard with ammo and brass in them.
Attachment 278
Attachment 307Attachment 308
portable kit for when I have free time on nightshift.;)
.222 to night.
it all fits in the laptop case.:innocent:
don,t need 4 dec points but it's consistant to 1 kernal:thumbsup:
Handloads:ka boom:
John
Thats a serious looking set of scales there mate :pacman:
Just been to Reloaders, man, you could drop some $$ in that place! bought some bullets, powder and speed loaders, goin back in a month!
:cool:
Mine is a rather humble setup. Just rehashed my old home made BBQ. Removed the burners, welded on some lugs, lick of paint then on with the ply (28mm on top). All the other gear is in boxes in the garage, just grab what I want and park where I want. Just need to work out a good spot for the powder thrower. Also have a Lee turret press on a very solid portable bench, good for the boot.
http://i844.photobucket.com/albums/a...112011650a.jpg
Nice bench! I screwd my powder thrower to a separate peice of ply, abt 20*30cm, so it can be out of the way when not needed, and sits securely on the bench when im using it, check my bench/change table, about page 2 i think....
Done a bit of a remodel! will put up new pics soon...
I thought we had lost this thread when the forum clapped out ages ago, unless I just had a mans search and missed it. :ORLY:
Great to see it still alive. I will post a pick up of mine later.
New bench a few weeks back
Attachment 3535
Damn, I know where I'm headed during the next zombie apocalypse:brains...!: :XD::thumbsup:
you got some serious capacity there
Kick ass set up Spanners.
That's a mini factory Spanners. Pretty cool.