Printable View
Starting afresh in W.A quite a process getting a firearms license, but anyway have 3 new rifles arriving shortly, going to break in the barrels at the local range, S&B is cheapest ammo available here whats the brass like to reload? Do I need to get Lapua or Norma brass straight up (and pay a premium) or use the S&B for load development..
Thanks Jeff
The S&B is great brass for reloading
Very uniform and well made
Go ahead and use it with confidence
and I HATED it with a passion in the .308 BLR it was harder than hobs of hell and really took some force when FL resizing...threw it away in tussock after shooting it.
Greetings @nor-west,
First do your load development in the same brass that you will use for your hunting loads, it is a waste of time and components otherwise. Second weigh your S&B cases before starting. I recently weighed Winchester and Hornady cases at 167-168 grains unprimed but GFL cases (Fiocchi?} cases weighed 187 grains. US military cases, LC79 and LC81 weighed 177 grains. All weights are averages without primer and are .308 cases. Heavier cases have less capacity so produce slightly higher velocity and pressure so are likely to string vertically so mixed cases are likely to have poorer groups. This is something I will test soon.
Regards Grandpamac.
+1 for their 8x57 and 6.5x55...... ended up going down the norma and/or ppu (which was way cheaper) stuffQuote:
Originally Posted by Micky Duck