I've found with mine it struggles with my can from Sonic on the 223. seems the muzzle cloud from it is different from the DPT on the 6.5, no problem, but it struggles with the smaller caliber. I have the parabolic adapter and mount it 30mm back from the end of the can using a rubber band as they have demonstrated in the tricks n tips. been waiting to test if further but time and weather and access rds gone are a hindrance
Looks like my labradar is safe from the rubbish for a bit longer!
Sent from my SM-A226B using Tapatalk
I have the replacement unit from the NZ agent. came with the parabolic adapter, not for free though. As I promised I would test this week and report here, I went to the range in the rain and mud. I almost quit that idea as it was pissing down. Anyway, got there and set up.
Attachment 223733
Bang bang bang......
Attachment 223735
Yes, it reads every shot except one when my phone decided to turn off the screen.
Parabolic adapter got shaken off by the recoil as I didn't want to tighten it too much.
So I used the unit without the parabolic adapter to see if it reads the speed.
Attachment 223738
It sure does, although the ES and SD aren't single digits but not bad for a new barrel getting it's first speed polish.
Attachment 223744
And shooting off a concrete bench sucks, the gun jumps a lot. The grouping is okay. More work to be done.
At least now I know that the last unit I got was a dud as this one worked well and the on / off switch actually response properly.
The updated app worked better, I am also getting better at using it. It can record strings of shots and you can add a target photo to your string so you know the result of those shots.
Attachment 223743
It was getting real dark and I had to use the illuminated reticle for the last 2 groups.
I would have tested the unit on my other rifle by attaching the unit to the barrel but I ran out of time.
I will report here next time I get to test the Bulletseeker more.
Have a great weekend guys.
I don't own a Bulletseeker, just a Labradar with inertia trigger which is very reliable. I have however used one when our team was in S Africa. It would trigger most of the time but some of the other guys found it super frustrating. The biggest issue was the accuracy- to get the vel range I wanted, I had to up the charge (of the different powder) quite a bit but the recoil was noticeably higher. It correlated with the primer flattening. One of the locals had a Labradar and that gave readings of about 80fps higher than the Bulletseeker!! The recoil and primers made me believe the Labradar.
80 fps variance between LR and BS seems a bit over the top. I’ve only seen about 10-20fps difference between the two units across 6 different rifles (22’s and centrefire) and is within the stated accuracy of the units (1%).
Id be nervous about trusting the accuracy of that particular BS unit for sure.
Seems to work well now. I strap a 4x3 to the bench if I use a bipod. You can then load you bipod, make a hell of a difference.
I’ll try remember that next time.Quote:
Originally Posted by tibo
I’m still learning this new 338 and BS set up and got a bit on my plate.
Haha…..
Just as a follow up, I was using the BS4 (great acronym) with my 223 and a sonic max 6 can, The BS struggled to log the shots, 12 out of 40. I had a hunch it was the can and the muzzle cloud ejecta due to the aperture of the max 6 vs the 223 projectile. Got a Dpt and tried again. it dropped one shot out of 20. I have had it work on 22lr, 223 and 6.5 with good results
ymmv.
Hey guys,
Here is an update again.
I got out of the golf addiction today and got to the range with my Blaser 6.5x55 and DT 338 Lapua mag. Trying the mounting method of using rubber rings and V shaped clamp on the barrel for the bulletseeker.
Attachment 233785
This method of mounting worked well, but it will not stay in the same position on your barrel after a few shots, so you need to readjust it.
Bulletseaker will miss 1 shot in every 5 shots which is annoying. I started doing 3 shots for some groups to see if its the movement on the barrel that is making it miss a shot.
Attachment 233786
The APP is working well and you have options to see shot information, add a target photo and add notes etc
Attachment 233787
My load worked well with no pressure sign and target picture taken at 200M. Zeroed at 100m dropped 14cm.
Attachment 233791
DTA 338 Lapua was a bitch to handle today because I'm rusty as after not shooting for such a long time.
Also when you want to shoot prone, the new concrete pad at the range doesn't work as well as how it used to be (grass patch).
The bipod prefers the grass rather than concrete to absorb some energy.
Anyway, Bullet seeker was missing bullets again, 2 out of 5.
I bet it was because the bipod was jumping too much and it can not stay on the path of bullet travel.
One of my loads was a bit hot and one shell stuck in the chamber and took a bit of hammering to extract the shell.
I used 250 grain Lapua scena bullets 95.5 grain AR2225, worked okay before, but not today.
It was a fun day and I'm happy to be at the range again.
Have a good weekend guys, daylight savings on this weekend.
Don't suppose you have a PCP air rifle laying around that you could test the Bulletseeker on? Even better if it has a can on it. I want to know if it will pick up the shots
Seems a little OTT to buy a Labradar for that, but my OCD is compelling me....
Up to Speedtracker (renamed) Mk4 now.
The FX Ballistic Chronograph is now "the" device but super expensive unfortunately.
My old Labradar just continues to truck along...
My 30 plus year old Oehler 35P as well.Quote:
Originally Posted by andyanimal31
GPM.
Update, replacement of Bulletseeker Match4 had failed to turn on. I only used this for the 4th time on the range, it started out fine. then started to pick up all the other shooters shots on the range. I had to turn it off and delete all the useless number that I collected. Then I couldn't turn it on again. The stupid little button on it just did not work. I have contacted the Australian agent and NZ agent to get a refund as I have lost confidence in this product after the second unit has fail after only very light use. I hope I get a refund as I bought it as the first Unit in NZ from Australia when they didn't have an agent in NZ.
My one hardly worked very well. Couldn’t get hold of Stu, tried a number of times but he hasn’t responded to emails. That was last year.
Stu did get back to me and offered to replace the unit with a 3rd gen Mach4+, but I can not waste more time or ammo after 2 units have failed. All the excuses from the agents, that i didn't line it up properly, I didn't have the correct distance from the barrel. Bullshit, the unit is just shit. It can't even turn on properly, how do you expect it to work correctly.Quote:
Originally Posted by Cowboy06
It is just a bad product and absolute Youtube promoted rubbish. Youtubers all said good things about it and none of them actually use one, they just use it on their video and lie about it to get paid. They are fukn liers. don't trust no youtube reviews.
