Using a comparator length instead of a COL (cartridge overall length) solves varying projectile length issues for hunting type reloading
School up on what a just touch or 5 thou / 10 thou jamb looks like on your projectiles ogive/shank
Then load accordingly for either mag fit or max accuracy
Here you can see rem mag ammo (162 ELD-X) that’s loaded for a ZCL (zeroed comparator length) of 2.641 inches
My just touch length in the Sako 75 is 2.645
So I’m jumping these projectiles to the rifling lands by 4 thou
Measure EVERY bullet that you make.
Attachment 133368