Thread: Stuck case removal tool Sth Taranaki?

Too far away to assist but before I bought one had a stuck case, 1st ever. I just drilled out the primer pocket and tapped to 6mm (1/4 Whitworth is better but who has those taps nowadays?).
Used a small socket as a spacer, flat washer on top of the socket, suitable 6mm bolt and out she came.
Before drilling the primer pocket see if you can wind the primer removal rod up as far as possible.

Since I've has a factory tool I haven't had a stuck case so they work...


Edit: My stuck case was a 308 so just used a 1/2" socket of a size big enough to go over the case and rest against the die bottom.