Thread: Testing a conventional approach to load development

Fortunely I've done it for you! No need. Life is simple, pick a good powder from ADI, a quality bullet, put it in good brass with a near max load seated to just short of mag length or something like 30 thou off the lands, whichever makes sense, shoot 10-15 of them, if it shoots good enough for you it's good, adjust speed and pressure as required, get a different bullet if it isn't good. Oh and start with a cut rifled match barrel bedded in a good stock if you want a good chance of actual sub-MOA precision

Keen as to get out on some kingis.... springtime is top water time...