Thread: Typical cold/clean bore effect?

Originally Posted by ChrisW

I clean everything out of my barrels after each outing. Both Carbon & Copper. Cleaning rods, jags, patches, brushes, and solvent. Whether I shoot 5 rounds or a hundred. Clean bore shot is usually about a cm to the left at 100m.

It should only take one round to foul the barrel from a stripped clean barrel. If it takes more than a couple shots to return to zero after cleaning then that speaks about the barrels quality.
I would suggest that people clean their barrels unless there is no possibility of a fouling shot prior to hunting. In which case id still be inclined to throw some oil down it - which may or may not mess with your first round POI.

I'm with you ChrisW have always cleaned the bore after use, it doesn't matter if it's one shot or 20 still clean with solvent etc. Can't say I have noticed huge differences in point of impact changes not enough to miss an animal, anyway.