Thread: What's a good bench height?

Originally Posted by steven

yeah my mounting is solid, 45mm thick x 150mm x 4 wide home made pine work bench.

The damn thing seems to need a lot of TLC though or it just stops "progressing" the shell plate. Seems the knurled nut holding the plate has to be "just so", cant be too tight or it jams at the last 1/2inch of the downstroke, too lose and well it doesnt progress. When it works it just great....

Where do you get spare parts from? I need a case ejector plate and the plastic index rod flipper head or whatever its called.

Steven.

Make sure the press is well lubricated especially the indexer rod and the frame cams it runs on, under the shell plate and on the case feeder rod.

Also make sure you get a good positive stop at both the top and bottom of the stroke and most of your worries will dissapear.
Check out this site to help solve your issues.
The Load Master Zone - reloading with Lee presses - videos and forums
loadmastervideos.com :: Index

Parts can be had from these stores.
NZ's Premier Gun Shop, Auckland Guns | Reloaders
Lee Reloading Supplies | Reloading Equipment Lee Precision | Discount Reloading Supplies by Lee | Titan Reloading
https://fsreloading.com/catalogs/lee-precision/
Lee Precision the Innovative Leader in Reloading Equipment

Cheers
Pete