Thread: Who still makes 0.223" diameter projectiles?

Got out to shoot some yesterday, so far the groups don't look to flash, although it was somewhat windy,
Shooting at 60M my groups were in excess of 2 inches, I'll keep working the loads upward as i'm still only at 22 grains of 2206H and looking at GRT 26.5 grains would be 38000psi so I should still have a fair bit of room to work up assuming that it will all fit in the case.

will get out again when the wind dies down, then any accuracy issues will be between my ability and potentially the projectile weight.

blue tape in the first image is point of aim, then covered the holes from the first group with more tape for the next load, should of brought another bit of paper
5 shot group, 20 grains of 2206H


4 shot group 21 grains of 2206H (one case wasn't turned enough to chamber)