Thread: just Varminting - how far was your longest shot on your last walk

before i went for a walk i put a few shot on paper at 100yrds. & 1 at 400yrds on steel to check everything is working as it should with a crosswind of 3-5mph
still shooting under .5MOA at a counted 700 rounds thru the barrel . . a recrown was done at 650 rounds


1 x 1.5 inch square at 400yrds . . . happy as


this Aussie guy is still putting out good vids
https://www.youtube.com/watch?v=z6ETKkoWUFc

Originally Posted by rossi.45

before i went for a walk i put a few shot on paper at 100yrds. & 1 at 400yrds on steel to check everything is working as it should with a crosswind of 3-5mph
still shooting under .5MOA at a counted 700 rounds thru the barrel . . a recrown was done at 650 rounds
Attachment 119134

1 x 1.5 inch square at 400yrds . . . happy as
Attachment 119141

this Aussie guy is still putting out good vids
https://www.youtube.com/watch?v=z6ETKkoWUFc

Hey Rossi just a question, obviously you are getting excellent accuracy ect with vmaxs without question. just wondering why you dont use higher b.c projectiles for wind cutting ability ect.

Originally Posted by Tim Dicko

Hey Rossi just a question, obviously you are getting excellent accuracy ect with vmaxs without question. just wondering why you dont use higher b.c projectiles for wind cutting ability ect.

good question @Tim Dicko

the hard and fast answer is i am very happy with the 87grn. VMax . . . but if someone has suggestions for a higher BC bullet for 1-10 twist 243W i would be interested to hear their thoughts

R.

Originally Posted by rossi.45

good question @Tim Dicko

the hard and fast answer is i am very happy with the 87grn. VMax . . . but if someone has suggestions for a higher BC bullet for 1-10 twist 243W i would be interested to hear their thoughts

R.

Enjoyed the Targex 95 but was slower obviously.

Hit Goats really hard though and was super accurate in my Tikka.

Originally Posted by SlimySquirrel

Enjoyed the Targex 95 but was slower obviously.

Hit Goats really hard though and was super accurate in my Tikka.

what was the actual BC & your speed for the 95s @SlimySquirrel

Originally Posted by rossi.45

good question @Tim Dicko

the hard and fast answer is i am very happy with the 87grn. VMax . . . but if someone has suggestions for a higher BC bullet for 1-10 twist 243W i would be interested to hear their thoughts

R.

The one in ten twist is not optimal for the over 100 grain it seems. the one in 8 looks like i takes over there. Try crunching the numbers on the 103 eldx on a twist calculator. i use 143 eldx in my 260rem varmint rifle and it has been very good at range.