Thread: got the bead on one, 7mm Rem mag stylez.

Interesting reaction after the shot, appeared un hit. Where did the bullet hit? Are you using the 162 gr SST, and what charge of powder.
I used the 162 gr SP in my old 7 mm mag with 65 grs of 2213 SC which worked ok

Originally Posted by Mooseman

Interesting reaction after the shot, appeared un hit. Where did the bullet hit? Are you using the 162 gr SST, and what charge of powder.
I used the 162 gr SP in my old 7 mm mag with 65 grs of 2213 SC which worked ok

and here i am being told the SST is a super grenade JOKES> ive tested it enough prior to shooting to know it is more rapid expanding than say a Corelokt in my opinion, So i actually held off on some oppertunities at say 80-120m away and didnt even contemplate the spooked deer..

then i had that happen, an i got the video on her 10 sec after shot, an it shows her for a 30 sec period or so, then i lost her.. because i was in the binos an not on the camera i didnt actually see what happened until editing/watching back and she basically sat down and then another minute or so after glassing the hillside looking for any movement? the thing comes tumbling down end for end.
the bullet hit a bees dick back due to my Zero being off to the Left 1 moa to begin with, i just wanted to avoid shoulder at all cost. photo somewhere woth the flash as bullet entered hide) post up in here in a tick


reasonable sized exit hole il post some more pics i spose.



63 grains... Rem primers, RP brass and the 162 SST here. (have 30 left, been practising dialling an just shooting the big bugger in general) then moving onto ELDX an most likely 2217 or reloader 26 pending how much money i have lol.
i do want to continue using this SST for practise though, around $73 /100 + $10 freight if unavailable near by, which is ok.. an the 2213 speed works for me? hmmm lol.
at the hit/taken off