Hammer Bullets

What is the difference between the Absolute Hammers and the Hammer Hunters?

Quote:

---

Originally Posted by HUNTY

What is the difference between the Absolute Hammers and the Hammer Hunters?

---

Bullet profile, bearing surface & few other things. Best visit the website for in detail differences.
I bought Hunters to suit my mag length, they are more like your conventional flat based profile verse VLD design.

Sent from my SM-S906E using Tapatalk

Quote:

---

Originally Posted by HUNTY

What is the difference between the Absolute Hammers and the Hammer Hunters?

---

Absolutes go faster :)

Shot these groups this morning at 200m to check "shooter excuses" both well sub MOA so not the rifles fault :thumbsup:

https://hosting.photobucket.com/imag...720&fit=bounds

Left target first shot high from cleaning, old batch of bullets, right target new batch, 3919fps average for all shots according to the Garmin which is a complete game changer by the way

Turn it on, throw it on the table, point it towards the target & party on, never missed a shot out of 50 I fired, even with others banging away....any one want a Labradar ??

Very happy with those groups using the thermal on 8 power & bipod, no doubt a decent scope & time taken they would be smaller but this is how it is used hunting :)

Ive been thinking along the lines of a solid copper projectile of around 110gr for my 270 as a point and shoot projectile. You guys with experience with these projectiles, what would you recommend? I idly wondered if the 116 would offer enough difference between a standard 130gr lead cored projectile?

Quote:

---

Originally Posted by whanahuia

Ive been thinking along the lines of a solid copper projectile of around 110gr for my 270 as a point and shoot projectile. You guys with experience with these projectiles, what would you recommend? I idly wondered if the 116 would offer enough difference between a standard 130gr lead cored projectile?

---

117grn HH .270wsm. 325 yds exit. 3450 fps with 20" barrel. This is very typical.

Attachment 240016

Quote:

---

Originally Posted by whanahuia

Ive been thinking along the lines of a solid copper projectile of around 110gr for my 270 as a point and shoot projectile. You guys with experience with these projectiles, what would you recommend? I idly wondered if the 116 would offer enough difference between a standard 130gr lead cored projectile?

---

I would run the 116 AH or the 122 HHT, the 116 will be smoking along compared to the 130 C&C

Cheers guys. Gives me something to think about.

Quote:

---

Originally Posted by Lucky

Impressive little bullets , wouldn’t mind trying them in the 260 , did you just order direct and no problems to buy through the mail ?

---

Tahr is loading me some, I’ve shot 1/2 a dozen deer with them so far. I’m very impressed. A big red stag last light didn’t go far at all.

Quote:

---

Originally Posted by craigc

Tahr is loading me some, I’ve shot 1/2 a dozen deer with them so far. I’m very impressed. A big red stag last light didn’t go far at all.

---

.260 and 124 grn HH @2850 fps. 18" barrel. Tiny groups.

@whanhuia here's a 117 grn HH .270 angled exit at about 200 yds.

Attachment 240020

Yiiikes thats a hole and a 1/2

I see a new Hammer 7mm 141gn with .550 G1 bc. Anyone importing the Hammers?

Quote:

---

Originally Posted by Tikka7mm08

I see a new Hammer 7mm 141gn with .550 G1 bc. Anyone importing the Hammers?

---

Funny i was going to text greg about these for my 7prc try something different

Quote:

---

Originally Posted by 199p

Funny i was going to text greg about these for my 7prc try something different

---

I have some 141 HBC coming to try in my 7-6.5 PRC, currently using 162 HHT @ 3125 fps

Will be interesting to see how they go, very happy with the terminal performance of the 162 HHT

@Kiwi Greg - Greg I'm keen to try some in my 280AI. Is it possible to get a sample of 162s and the 141s when they arrive?