Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator ZeroPak


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 31
Like Tree4Likes

Thread: Making a knife

  1. #1
    Member
    Join Date
    Jun 2015
    Posts
    37

    Making a knife

    Gidday people, just wondering if someone can point me in the right direction on where to buy some knife blanks, got some nice pieces of deer antlers to turn into handles, and also if anyone has done this before any tips will be greatly appreciated

    Cheers Ben

  2. #2
    Member
    Join Date
    Aug 2013
    Location
    Alexandra
    Posts
    324
    I've never heard off knife blanks as per say, they may very well exist I've just never seen them. I would just go to your nearest engineering spot, You first need to decide on the bland thickness and the steel type, you might be lucky and they might have an off cut for a good price.

  3. #3
    Member
    Join Date
    Aug 2014
    Location
    Auckland
    Posts
    681
    Yeah mate, I can, depends on what you are after but, lots of options, drop me a line and I can point you in the right direction.

  4. #4
    Member southernredneck's Avatar
    Join Date
    Sep 2014
    Location
    southland
    Posts
    136
    My old man used make a few years ago he was a saw doctor in a sawmill and used to use the steel from old saw blades could be another option for getting some steel


    Sent from my iPhone using Tapatalk

  5. #5
    Member
    Join Date
    Dec 2014
    Posts
    568
    Leafsprings are a dime a dozen or files.

  6. #6
    Member
    Join Date
    Jun 2012
    Location
    lower hutt
    Posts
    1,048
    Yeh im afraid adding scales to a pre bought blade isnt exactly knife making however there aee sites in the usa that sell both.

    Files are a good source of steel, d2 usually, last time I bought a length of 01 from fletchers, 50x3 flat
    #BallisticFists

  7. #7
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,030
    Take a look at Jantz supplies in the USA.

  8. #8
    Member
    Join Date
    Aug 2014
    Location
    Auckland
    Posts
    681
    Ss+m in Auckland and Christchurch sell O1 and other tool steels suitable for a knife, they will also temper them for you once you have roughed out the shape, I got loveless blots from the UK bot they may be a closer source, and don't let anyone tell you that just putting scales on a knife is easy, if you are shaping it all by hand and want to do a good job it's hard work...also even the Japanese sword smiths of old dot not make the swords alone, someone made the blade, someonelse the sheath, someone else the sharpening...

  9. #9
    Member hawkfish's Avatar
    Join Date
    Oct 2013
    Location
    Cambridge
    Posts
    198
    Try Welcome to the home of English Handmade Knives

    If they dont ship to NZ let me know i should be over in a couple of months.
    Scouser likes this.

  10. #10
    LBD
    LBD is offline
    Member LBD's Avatar
    Join Date
    Jun 2015
    Location
    Murchison
    Posts
    762

  11. #11
    Member HNTMAD's Avatar
    Join Date
    May 2014
    Location
    Wairarapa
    Posts
    2,731
    Hamish
    027 5422 985
    www.hgd.co.nz

  12. #12
    Shootin the breeze.... Survy's Avatar
    Join Date
    Jan 2013
    Location
    Auckland
    Posts
    656
    Good buddy kindly made a wee skinning one up for me, he cut out the tang from a spear he brought back from overseas, and I supplied some antlers that were being discarded off a deer at the sheds.

    All he told me was the antlers were a pain when shaping as it smelt like burnt plastic, and the drill bits went blunt when drilling into the tang
    Thipa likes this.
    Grouchy Smurf had it right all along...

  13. #13
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,030
    Tell your mate that a drill bit can be resharpen... And the tang can be annealed.
    mimms2 likes this.

  14. #14
    Member
    Join Date
    Jun 2015
    Location
    Auckland
    Posts
    18
    I"m an amateur knife maker and can help with blanks. At this stage I have a few O1 toolsteel (carbon steel, not stainless) blanks available that have already been heat treated. Send me a PM

    Sent from my B1-730HD using Tapatalk

  15. #15
    Member HNTMAD's Avatar
    Join Date
    May 2014
    Location
    Wairarapa
    Posts
    2,731
    Quote Originally Posted by scoped View Post
    Yeh im afraid adding scales to a pre bought blade isnt exactly knife making however there aee sites in the usa that sell both.

    Files are a good source of steel, d2 usually, last time I bought a length of 01 from fletchers, 50x3 flat
    Not all of us are as skilled as you @scoped
    Ooops likes this.
    Hamish
    027 5422 985
    www.hgd.co.nz

 

 

Similar Threads

  1. making a knife and a sheath - part 1 (assembly)
    By Shelley in forum Gear and Equipment
    Replies: 4
    Last Post: 05-07-2015, 01:33 PM
  2. Cray pot making
    By Munsey in forum Fishing
    Replies: 3
    Last Post: 22-09-2013, 05:36 PM
  3. Shot making
    By Bulltahr in forum Reloading and Ballistics
    Replies: 5
    Last Post: 30-08-2012, 04:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!