Thread: 20 Practical bolt gun?

Thanks TeRei-yes have read this on the net and it got me all wanting! If only I had a Tikka 595 that needed re-barreling...Guess thats what The Claw did...good on ya. I heard that True Flite are not turing out as good a barrel as they used too and don't know if thats true? Guy at Hamills in Tauranga passed the comment. Guess he is wrong as Redbang & The Claw would not have use True Flite if that was the case?
What primers you using Redbang? CCI br4?

Originally Posted by V Man

Thanks TeRei-yes have read this on the net and it got me all wanting! If only I had a Tikka 595 that needed re-barreling...Guess thats what The Claw did...good on ya. I heard that True Flite are not turing out as good a barrel as they used too and don't know if thats true? Guy at Hamills in Tauranga passed the comment. Guess he is wrong as Redbang & The Claw would not have use True Flite if that was the case?
What primers you using Redbang? CCI br4?

What other barrel makers do we have to choose from in NZ?
What sort of cost does one have to expect to pay, to say rebarrel a 223 to a 20 Practical/204 Ruger/223AI?

4200... ha..I could do that with 40g in my 20 BR!

mind you barrel only lasted 1200 rounds!

Theres valcun.

As for reaming it cost me $200-250 one of those numbers so I guess most gun smiths will be similar

Originally Posted by Toby

Theres valcun.

As for reaming it cost me $200-250 one of those numbers so I guess most gun smiths will be similar

So about $500 all up then? Not to bad then.
Probably cheaper than trying to sell my Tikka and buy a Varmint one.

Would you end up with a better quality product from Trueflight? But a more expensive one?

Originally Posted by Beetroot

So about $500 all up then? Not to bad then.
Probably cheaper than trying to sell my Tikka and buy a Varmint one.

Would you end up with a better quality product from Trueflight? But a more expensive one?

True flite ultra match barrels are about $550 + GST and chambering and fitting about $250 + GST. I would say to work on a grand to buy, chamber & fit up most of the premium barrels.

Sent from my SM-N9005 using Tapatalk

Originally Posted by Beetroot

So about $500 all up then? Not to bad then.
Probably cheaper than trying to sell my Tikka and buy a Varmint one.

What Tikka do you have ?

Originally Posted by Kiwi Greg

What Tikka do you have ?

I've got a Tikka T3 lite in 223. Was considering a Varmint in 223, or possibly 204 Ruger.
I really like it nice feeling and accurate, but want a heavy barrel, probably because I want one just as much as I need one.

Originally Posted by Beetroot

I've got a Tikka T3 lite in 223. Was considering a Varmint in 223, or possibly 204 Ruger.
I really like it nice feeling and accurate, but want a heavy barrel, probably because I want one just as much as I need one.

What twist 8 or 12 ?

Originally Posted by V Man

Hi Folks, Anyone own a 20 Practacal bolt gun? I would love to know how they like it. Cheers V Man

I have some practical bolt guns, I don't see any problem aiming for 20

Have a barrel, bullets and brass bit of ammo for 20 practical in the sale part.

I bought a M595 off of a forum member, fitted a 26" Bartlein, chambered it in 204 Ruger and I love it. Its on page 500 of the "show your rig I think as posted by Jaco Goosen.

Maybe I'll go for the Tac or the Prac next time.

Ouch.....swapped my 204 Howa Varminters barrel after 4000 shots.

(Was considering the 20 BR.....but you cured me from that idea hahaha)