Printable View
Howsit guys just after any advice on what i should do with my ole 270win, Its a remington model 700, just standard stock, iv had it for 12 years so thinking about making it more of a bush gun with been able to shoot to 400 -500y. Il give it a chop to start with.what length would be recommended?.any other advice would be much appreciated. Thanks
Also i use 145 eldx would that be ok for close range bush hunting
I’d just go 20” with a magnum can my do it all rifle is 20” with a magnum can it’s very compact yet still reaches out far
I have a 270win rem700 , 18inch barrel with dpt. 150gr soft points for bush hunting.
I’d have no issues chopping one again to 18inch
Down to 20" is fine.
My as factory .270Win Sako 75 Finnlight barrel is 20 7/8" (7/8" makes a difference according to the Mrs :XD:)
I would recommend the steel baffle for the DPT cans, as the blast can be erode the alloy baffles pretty quick.
Awesome cheers guys, should i get it bedded?
Almost no point bedding the standard plastic stocks.Quote:
Originally Posted by MattyR
They’re too soft and flex too much for it to be worthwhile.
A decent aftermarket stock will usually improve accuracy a decent amount.
You can bed the standard plastic stocks if you stabilize the front end first. Check out Nathan Forsters info on this (Terminal Ballistics) has great step by step guides on how to do it.Quote:
Originally Posted by Matt2308
I use a remmy bdl. 19inch barrel with 130s works well.
If its a 'close range bush gun' whats wrong with just leaving it at 22" and no can, not going to be shot much in anger ?Quote:
Originally Posted by MattyR
Even with a can it will still need hearing protection, so a longer barrel is no worse for ears in all reality
18" and you'll still be able to shoot 500 yards piece of cake.
Could be wrong but I'm pretty sure Duley's .270 bushpig data superformance behind a 145gr eldx was still going 2950fps.
Why have a longer barrel than you need!
Duleys did it with factory federal stuff too if memory serves me right....
leave barrel long, stick a can on it,bed it and for the love of God put a decent bottom end scope on it..no more than 3x so a 3x9 is just about ideal....
20” is a pretty good compromise if still wanting to stretch a bit every now and then. Even 18” be ok as mentioned. Put a DPT magnum can on it and away ya go. Don’t worry about the stainless baffle, it’s just extra weight. Treat the first alloy baffle as an expendable and just replace it when needed which won’t be all that often (haven’t had to do it yet on any of my short tubes).
Thanks bro appreciate itQuote:
Originally Posted by stagstalker
Yeah I’ve done this a number of times. Works well and is a heap cheaper than a carbon one!Quote:
Originally Posted by Bobba
Is there a step by step guide?Quote:
Originally Posted by Hunter_Nick
plenty on you tube mate
Ill take a look����Quote:
Originally Posted by Kelton
Ill take a look👌🏾Quote:
Originally Posted by Kelton
Hey MattyR, I have a Rem 700 270 barrel here that was shortened to 19.5 or 20 after it got some pitting at the muzzle in storage. You could grab it and try it on your rifle. I am only 20 mins from RangiQuote:
Originally Posted by MattyR
Thanks for your offer Moa hunter i ended up giving it the chop to 18.5 inchs, i zero up again go from there. Cheers MattyQuote:
Originally Posted by Moa Hunter