Thread: 7mm08 vs 7mmSaum for max 500m Hunting

Originally Posted by lau lau

What powder and projectile are you using?
I'm doing load development with 2209 and 175gr berger elite hunter atm

162 eldm, 2209. Waiting on dies to arrive to start propper load development.

Originally Posted by riflegus

Was in same boat as you trying to decide
I whent 7prcW (6.5 prc neck up to 7mm)
So plenty of brass options and shooting the 162 elds very well. Simmilar as SAUM
Load development still in progress but I'm very happy so far.
Attachment 262771

Imagine how good that will shoot when you finish installation of your rings

Originally Posted by Tim Dicko

Imagine how good that will shoot when you finish installation of your rings

That's how I like them ! Save weight ��
Only pic I have in my phone ! Obviously took it before shooting.
Will shoot great as I've load with wrong powder, wrong dies, and few other things not 100%

162eldm from short 17” barrel 7/08 = 2500- 2575fps

162eldm from short 20” barrel saum, prc, rem mag = 2900 - 3000ish

At 500m with 10mph wind there’s only .25 Moa difference in wind deflection.

That’s about 1 1/4 inch on target.

I rekon choose what one makes you feel warm and fuzzy inside.

Originally Posted by SPEARONZ

162eldm from short 17” barrel 7/08 = 2500- 2575fps

162eldm from short 20” barrel saum, prc, rem mag = 2900 - 3000ish

At 500m with 10mph wind there’s only .25 Moa difference in wind deflection.

That’s about 1 1/4 inch on target.

I rekon choose what one makes you feel warm and fuzzy inside.

The difference is about 4 inches in a full value 10mph wind at 500m.

Thank you, i will overthink it. Lots of good arguments for the 7mm08, but also about a total custom rifle and the SAUM.


And its a real unique thing here. All People want to help and give the best information. In our german forums there everybody means he is the king and now it better etc..
And you guys are friendly and helpful. More of a good community, just as you wish. Thanks for it !!!

Just grab a tikka in 7x64. Factory twist is good. Shoot 162s, for longer range. upgrade the stock if you wish. Spend the savings on hunting. And you can use premium rws factory ammo as a back up.

The sale of the other brass will cover the cost. I reckon they give away once fired x 64 brass in Bavaria at the shooting ranges?
Sent from my iPhone using Tapatalk

According to my ballistic app a 162eldm at 2600fps produces 2440 ftlb of energy at the muzzle

7saum can push a 180eldm at 2850fps +/- without too much difficulty at 500 metres your looking at 2567 ftlbs of energy on arrival.

Sold the 162’s and grabbed 3 boxes of the 180’s achieving mid 2800’s with RL26 in norma brass. Picked up 50 ADG which i have yet to shoot

Have a limbsaver on one end that tames things well just added one of DPT’s new muzzle breaks to the other end cause i just had to have the shiny new toy- not tried the break yet

At extended range i’m more worried about unexpected wind drift then I am energy on target. For that reason at 500 I prefer the saum but both will do it. Make the decision based on recoil IMO. If you are happy with a bit more kick and can still shoot it just as accurate then the saum will do it better and safer. If not, then the smaller 708 will be fine too.

The 180eldm’s BC sees it hold onto energy really well and for the same reason its very good in the wind ��

i have a 300 saum, 7 saum and 6.5 saum. my 18inch 300saum epic out to 748m so far.

Originally Posted by Larskramer

i have a 300 saum, 7 saum and 6.5 saum. my 18inch 300saum epic out to 748m so far.

What pill are you using in the 300 saum

Sent from my CPH2531 using Tapatalk