Thread: Can you look at my rifle for me?

it's all back together every thing how it should be.
did a quick bore sight in the lounge cleaned the scope lenses as its a Tasco world class so just need to shoot it tommorow

Sent from my SM-G900I using Tapatalk

if it doesn't shoot I will put on one of my good 30mm tube scopes and see what the story is

Sent from my SM-G900I using Tapatalk

Originally Posted by andyanimal31

it's all back together every thing how it should be.
did a quick bore sight in the lounge cleaned the scope lenses as its a Tasco world class so just need to shoot it tommorow

Sent from my SM-G900I using Tapatalk

Good luck, not that it is luck you are wanting....ALll the best. With the Tasco scope, I do not think they made a lefty....but when testing, take a spare scope with you. It saves another trip. Batter yet set one u on a spare set of rings so all you have to do is swap the whole lot......

There's a book case in the way of your 100m range!
Replace book case with barn door, job done

Thats good that you seem to have found the cause, the loose scope base would definitely be causing that. Hopefully with an improved trigger aswell those groups will shrink.

Probably nothing wrong with the equipment, I'd say shooter error lol

Originally Posted by Philipo

Probably nothing wrong with the equipment, I'd say shooter error lol

lol hey you little homo when I see you at toby's shoot I will sort you out!
I shot it last night and it's going way better.
managed a 1.5 inch group at a hundy and that's with a 10 pound trigger.
I shot a tikka straight after and just about had a premature let off!

Sent from my SM-G900I using Tapatalk

You can adjust the trigger.
Did mine, think there was something on Youtube about it ?
Nice crisp let off, now
From memory, Mossberg 'borrowed' Savages trigger design.

Originally Posted by Frogfeatures

You can adjust the trigger.
Did mine, think there was something on Youtube about it ?
Nice crisp let off, now
From memory, Mossberg 'borrowed' Savages trigger design.

I will have to take it out of the stock and have a gander at the trigger I reckon!

Sent from my SM-G900I using Tapatalk

When you take the stock off, Check that the front screw isn't bottoming out on the barrel thread as was a mates 300wm 4x4 Mossy. Filed it down and was away racing!

Originally Posted by Fireflite

When you take the stock off, Check that the front screw isn't bottoming out on the barrel thread as was a mates 300wm 4x4 Mossy. Filed it down and was away racing!

my mate who owns it has taken it hunting so will see if he has had a shot at a moving target and wants to persevere with the trigger/rifle.
it has a pretty murky Tasco w/c on it to top it off!
I suggested a trigger job bedding job and suppressor and a vx3i.
at least he will then have a good scope and can to put on a new tikka!

Sent from my SM-G900I using Tapatalk