Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Delta


User Tag List

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 15 of 32
Like Tree51Likes

Thread: Factory 308 ammo options

  1. #1
    Member viper's Avatar
    Join Date
    Feb 2015
    Location
    Rabbitvegas
    Posts
    2,604

    Factory 308 ammo options

    So I have brought a Bergara 308 takedown, away getting the chop to 17 - 18 inch barrel.
    1 -12 twist rate. I don't reload anymore and really don't want to go back to it either.
    It will be used on deer ( reds and fallow ) out to maybe 400 yards or so .
    Just wondering what my options are in factory loaded ammo . I have used Corelocks in the pass and Fiocchi SP , both work fine .
    Does anyone have something else they prefer or recommend trying , hollow points , ballistic tips ??
    Really just after options and opinions at this point .

    Cheers Viper

  2. #2
    Gone................. mikee's Avatar
    Join Date
    Aug 2012
    Location
    Nelson, New Zealand
    Posts
    9,669
    My 1-8 Twist .308 one(now sold) did not really like 150gn Sako Gamehead 1-2 inches was best it could manage. (Same ammo in the Tikka that replaced it does 1/2 inch repeatable)
    However 168gn ELD-M handloads shot 1/2 inch groups and were repeatable. I was going to try Federal Fusion 165gn or 165gn Sako Gamehead II but instead I channeled my inner Ryan and Philipo and sold it after only owing it for 5 minutes
    jakewire, viper, dannyb and 1 others like this.

  3. #3
    Member
    Join Date
    Sep 2020
    Location
    wairoa
    Posts
    430
    Anything around 150grn soft point or Spitzer will do the job well
    veitnamcam, viper and dannyb like this.

  4. #4
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,596
    if you going somewhere where range will likely be under 150 yards,more likely 50 yards,the winchester 180grn powerpoint bog stndard stuff is the ducks nuts....the 150grn load the same is good...really good but the 180 just hits a bit harder up close and the recoil shove is LESS....
    Dusty Fog had some buffalo river stuff...pretty sure it had a 165grn sierra ???? projectile so it would be a very good factory option to look at for out further...now PERSONALLY I would steer well clear of hornady superpreformance......my limited experience says its WAY TO HOT for my liking...others swear by it,I swear at it.
    viper and Randomandrews like this.

  5. #5
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,764
    Fed blue box 150gr always served me well.

    Belmont 130gr HP always seems to shoot extremely well but it is a light frangible projectile.
    Bill999, tikka, viper and 2 others like this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  6. #6
    Member
    Join Date
    Feb 2016
    Location
    Stewart island / canterbury
    Posts
    9,186
    Hornady whitetail 150gr have worked in a couple of 308s I've had. Superperformance was even better but quite a bit more $$
    viper and dannyb like this.

  7. #7
    Member
    Join Date
    May 2012
    Location
    Far North
    Posts
    4,824
    Any boring 150gr soft point cup and core will do the job 308 is such a good killer that even the highland stuff works well and is all I ran for years in my teens


    Sent from my iPhone using Tapatalk
    Dama dama, viper and Micky Duck like this.

  8. #8
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,951
    If you want to shoot out to a decent range I reckon the 168gr eldm hornady match ammo or the 150sst superperformance.
    viper likes this.

  9. #9
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,951
    Otherwise any basic softpoint should do

  10. #10
    Member Pop Shot's Avatar
    Join Date
    Dec 2011
    Location
    Rangitikei
    Posts
    1,270
    My T3 shoots factory 150gr Superperformance SST into around an inch at best. Same rifle shoots 150gr Winchester SuperX SP into half inch.

    Will reload 150gr BT once I've shot this stuff out.
    viper, Micky Duck and Preacher like this.

  11. #11
    Member
    Join Date
    May 2015
    Location
    Nz
    Posts
    2,951
    Actually nosler 150gr BTs could be a good factory option
    Carbine, Gibo and viper like this.

  12. #12
    Member Rock river arms hunter's Avatar
    Join Date
    Mar 2012
    Location
    Deep South
    Posts
    2,114
    Federal blue box 150s.

    If you wanted to try some Tipped stuff try the fiocchi 150s with SST's. Ran the 95gr stuff through a mates 243 through the chrony and it was super consistent with a low ES.

    You could also try the Sako stuff. If I'm correct they do a 165gr load with sierras loaded on top? Memory is a bit shit at the moment with a new family member.
    viper likes this.

  13. #13
    Member
    Join Date
    May 2019
    Location
    Southland
    Posts
    497
    hornady whitetail or federal bluebozlx, whichever one you can find and stock up
    viper and dannyb like this.

  14. #14
    Member viper's Avatar
    Join Date
    Feb 2015
    Location
    Rabbitvegas
    Posts
    2,604
    Quote Originally Posted by Rock river arms hunter View Post
    Federal blue box 150s.

    If you wanted to try some Tipped stuff try the fiocchi 150s with SST's. Ran the 95gr stuff through a mates 243 through the chrony and it was super consistent with a low ES.

    You could also try the Sako stuff. If I'm correct they do a 165gr load with sierras loaded on top? Memory is a bit shit at the moment with a new family member.
    Yep, I was looking at Fiocchi, some very good projectile options . I looked at the sst option as well

  15. #15
    Rocks in his pockets Joe_90's Avatar
    Join Date
    Jun 2019
    Location
    Central Otago
    Posts
    1,421
    If only you knew a guy just up the road who likes mucking around with reloading.... and happens to have 308 dies sitting on the shelf.
    chainsaw, gundoc, viper and 2 others like this.
    Every machine is a smoke machine,
    If you use it wrong enough.

 

 

Similar Threads

  1. Factory ammo for 308
    By Porter83 in forum Reloading and Ballistics
    Replies: 5
    Last Post: 06-07-2021, 10:06 AM
  2. Fast twist 224 factory options
    By 300LRH in forum Firearms, Optics and Accessories
    Replies: 13
    Last Post: 24-10-2020, 09:16 PM
  3. Re:Factory Ammo .308
    By Chris in forum Reloading and Ballistics
    Replies: 9
    Last Post: 30-07-2012, 07:02 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!