Printable View
Hi all, has anyone got one of these? My first time at the range and seemed to run out of elevation adjustment, so I loosened the two screws which hold the top of the turret on and now I can't seem to get them back in. The screw in the middle I those two has obviously been backed in and out a lot given the marks on the head, and I can't get it to move.
https://www.valdada.com/
Or try Scott at liberty optics in the states, he was one of the original retailers
https://www.libertyoptics.com/
I would contact them and ask.
IIRC depending on the age of the scope and I cant seem to find the snipers paradise thread on it anymore, certain models were similar to the erector system in US Optics scopes, Ie adjust the zero position with in the erector- which in I think the center screw was used only
I had exactly the same problem the other day. I never managed to solve the problem of resetting the zero, but did get the cap screwed back up. The internal part with the female threads drops down so I inserted some longer screws to engage the threads then pulled the central piece up enough to be able to insert the shorter original screws. I would also be keen to know the correct method to set zero on these scopes. Can't find any info on the net either.
Set zero? Have you looked here?
https://www.youtube.com/watch?v=U6S39XMj_TU