Anyone have any experience with these? A rifle with a bare weight of 2kg would be nice to carry around but I’d love to hear how they shoot before dropping some coin on one.
Printable View
Anyone have any experience with these? A rifle with a bare weight of 2kg would be nice to carry around but I’d love to hear how they shoot before dropping some coin on one.
I've got one. 16" 308. Weighs 2.6kg with dpt and Swaro 3-9x36. No talleys available in NZ yet so you're stuck with a rail unless you're handy with a Dremel and can make normal howa 1500 talleys fit (as I have done). Haven't shot it yet.
Attachment 226825
before you buy one with a rail run a straight edge across the rail there rails are out by a small amount shame as there good qaulity guns with a nice stock just cheap rail on them easy fix
2 gunsmiths I spoke to said the stocks need a bit of work to get them sorted but if your handy with a dremel you’ll get it sorted. They need a cheek riser tho… better suited design for open sites. I have a barrelled action here waiting a few carbon stock builds. Just need to clear some space in the workshop and get going lol
Care to elaborate on the work needed on the stocks? I looked at 4 or 5 of them before getting mine and nothing seems to stick out that needs sorting with the stockQuote:
Originally Posted by Scott Cowan
H&F gis have sent back 2 stocks and two trigger guards. But best I don’t get into a he said she said. Ring H and F Gisborne and ask for Debden. He will be super helpful I’m sure.
How long is the mag box on these is there room to seat pills out a fair way? or are they like a rem model 7 a bit on the short side?
Looking foward to hearing a report in this!Quote:
Originally Posted by Ryan_Songhurst
2.8" internal length, will take std SAAME and CIP spec COALs. I offered up a few ACIS 3" l mags to the action and they will feed from this. You will however need a bit of custom work to the stock to fit an Atlas bottom metal or simalar.Quote:
Originally Posted by yerimaginaryM8
The one I handeled was a terrible fit in the stock, the rear tang stuck up high like it had been shoe horned into a stock that was designed for something else. The barrel channel was very narrow and contacted one side of the very light profiled barrel. All small issues to correct but for the asking price you shouldn't have to. The barreled action is a howa mini that has been stretched 6mm and the mag well and ejection port opened up. The bolt know has also been drilled to drop even more weight. All actions are blued chromolly (S/S not available) that the importer had Ceracoated to combat future rust issues. The barrel profile is the same as the howa mini s/s lightweight so it's very thin. 20" in 6.5 creedmoore and 16" in .308win. .243 win and .708 are in the works. The barreled action weighs 1.6kg and in true carbon fiber stock fashion they range from 400gr to about 600gr.
Personally I'm a fan and will pick one up in Creedmoor but I think I'll go more custom on a stock for it.
Would Howa mini Talleys fit then if they are a stretched mini action ?Quote:
Originally Posted by Wingman
No as the rear part of the loading port has been cut back further meaning the rear holes have been made closer together. You could drill a new hole in the mount though.Quote:
Originally Posted by dannyb
Talleys, HS precision and Nikko stirling all make rails to fit it but nz is waiting delivery.
Yeah the stock fit and finish on the 2 I've handled seemed a bit shit given how much you are getting stung for the stock. If only some clever bugger was building lightweight chassis in nz for howas ��Quote:
Originally Posted by Wingman
I was thinking of grabbing one and having a go at putting a stock or chassis together
Quiet your pie hole.. it's a supprise :DQuote:
Originally Posted by Nick-D
