Printable View
Gday with blaser barrels being very hard to come by, especially r93, I'm keen to import a custom barrel or 3 from these guys who have a very good reputation.
Custom Barrels
Import permit would be the easy bit, does anyone know what I need to get it to leave the states? Also estimate of costs etc.
Cheers
Ok thanks for that info.
Money isn't an issue as it's impossible to get what I want here. I will send them an email and see what they say as seems weird to think they wouldn't have a "licence" so.dont see why a middle man would be needed...
Can understand a one of few for the export permit
Reloading International could probably assist but it's good you said money isn't an issue.....
didn’t the minimum value for an export permit raise from $100 to $500? Meaning that if the retailer is licensed for export then a $250 BATF permit would not be required until the value exceeds $500USD?
Could see if one of the independent dealers may be able to assist for a reasonable fee
Contact Dean at All Gun Sports NZ. He arranges the whole deal.
Why not just get one spun up here?
If you can tell me where I can get one without sacrificing my existing barrel I'm all earsQuote:
Originally Posted by robhughes-games
If ypu could find out the specs then any decent machine shop could do the job.
Don't go there it will end in blood and tearsQuote:
Originally Posted by PerazziSC3
You can't just spin up a Blaser barrel
Differential hardening of the locking area is the main issue
Doubt there's anyone in NZ who could do it at a realistic price without blowing up 10 to work it all out
I have found these... they also make some pretty awesome chasis. Unfortunately r93 not available for another 3-4months which isn't so bad
Attachment 167825
@PerazziSC3 there’s also these guys https://www.jsipandsons.com/r8-barrels some talk on US forums about their communication skills being lacking but I think that coincided with them maybe having trouble with Blaser over using R8 and R93 to label their barrels so now they label them Gamma88 and Gamma93 barrels..
If he had the specs then there are loads of cnc shops thaat could do it. Place where i work could easily. I certainly wouldnt take it to your average smith with a 3jaw chuck in the shed..Quote:
Originally Posted by akaroa1
Heard to many bad things about them in terms of communication from people in the states, let along us on the other side of the world. The crowd I linked was previously "Elmer's barrels" and have 100% good feedback onlineQuote:
Originally Posted by ishoot10s
Money no issue? Righto then, I'll just be checking my passport for my unexpected upcoming round trip to somewhere in the States :)Quote:
Originally Posted by PerazziSC3
Unfortunately a lot of barrel manufacturers/prefit barrel makers are not aware/not willing to take the hassle to export the barrel for us. Here is the response from Southern Precision Rifles:Quote:
Originally Posted by GDMP
Quote:
Hi Ran,
Unfortunately no - the regs on firearm parts don't seem to be eased. I have yet to see any clear indications in this area - our government is loath to make info on this easily accessible.
Regards,
Russ
Palehorse got back to me, more than happy to do it. Export permit thing is $200 which was expected but freight for 2x barrel is $678 usd which does seem a bit... that would being each barrel to roughly $2500nzd after gst etc. Puts it roughly on par with buying a 2nd hand one, chopping it and getting a custom threaded in
