Model 7 Scope Mount

Has anybody with an older model 7 with the three hole receiver ever drilled and tapped a second hole in the rear bridge to accept two piece bases?
US forums suggest it is doable, prefer first hand info. Looking to fit a set of Talleys and want to make sure spacing is correct.
All feedback appreciated.

Quote:

---

Originally Posted by JonP

Has anybody with an older model 7 with the three hole receiver ever drilled and tapped a second hole in the rear bridge to accept two piece bases?
US forums suggest it is doable, prefer first hand info. Looking to fit a set of Talleys and want to make sure spacing is correct.
All feedback appreciated.

---

Yep no problem for a real gunsmith

Yes, done it a couple of times in a few minutes. You can use a number 31 drill and a 6x48 tap.

Good stuff. Thanks