Had my stock done for $130 from memory.Quote:
Originally Posted by csmiffy
Attachment 136962
Sorry. Just realised it's not a model 7:o
Printable View
Had my stock done for $130 from memory.Quote:
Originally Posted by csmiffy
Attachment 136962
Sorry. Just realised it's not a model 7:o
And the bolts on the wrong side :pacman:Quote:
Originally Posted by Shearer
The main reason I don't own a Model 7:D They never have made them with the bolt on that side.Quote:
Originally Posted by chainsaw
Mmm so an action wouldnt be too dear eitherQuote:
Originally Posted by Shearer
Interesting
How does the hydro dipping wear?
Very well on the stock. No sign of wear/damage after 6 or so years of regular use.Quote:
Originally Posted by Echo
That 2nd one really does it for me. What cal?Quote:
Originally Posted by Mohawk .308
@csmiffy from memory the cost of barrel n action was around the $75 markQuote:
Originally Posted by csmiffy
My little lightweight .223 Predator, I custom duracoated the black as I wasn't a fan of the full hydro dip look.
https://i.ibb.co/PwhvnvW/2013-02-28-17-22-53.jpg
https://i.ibb.co/nMPCnSy/2013-02-28-17-23-17.jpg
https://i.ibb.co/Bch0jyh/2013-02-28-17-24-14.jpg
That's not too badQuote:
Originally Posted by Huk
hey brains trust, i upgraded from my 700 to a model 7 in 7mm08 and it seems to hate the cheap federal ammo i know and love. any recommendations on a factory ammo it will like?
Norma ammo with the Nosler 140g Ballistic TipQuote:
Originally Posted by sddeeming
cheers man, reloaders.co.nz sells them. I'll grab a couple of boxes and see how i go
Hey man, what about the reloading option? If you still have the Federal brass, for the cost of a few boxes of Norma ammo you could be up and running with some Lee dies and once fired cases that fit your chamber.Quote:
Originally Posted by sddeeming
Back in December 2019 a good ole hunting mate was very sadly taken from us quite a few years too soon. Wayno had and loved his original model 7 in 243 win. He'd used it to hunt rereationally and also do some commercial goat culling over the years. Many many goats and lots of venis had fallen to Wayno and his beloved Remmy Model 7.
He'd shot out the original factory barrel, not surprising with the mobs of goat that had been slayed with it. He had sourced a new barrel via Trueflite and then had God himself (Allan Carr) machine and fit the barrel. Wayno had great respect for Allan's Gunsmithing, hence he called him God ;-).
I'd enjoyed Wayno's company on several weekend long hunting trips, and heard reports of many more of his hunting stories, normally involving the little M7 243. I certainly knew his love for the little pea shooter.
Anyway a little while after Wayno left us, i was offered his prized Model 7 to purchase. I knew it was a great little rifle and thought it'd be pretty neat to have it and take it out now and then and shoot another deer for Wanyo with it. So i grabbed it!
Well i spent a couple of hours at the range this morning, once i finished sorting the other rifles, i thought id put a couple of rounds thru Waynes little 243. I used some of his handloads that came with the rifle. I normally wouldnt be too keen on shooting any old loads i hadnt made, but i had much faith in Wayne's handloading ability so thought id see how they went.
After a couple of shots at 100 to confirm zero, i went back to 300 and fired a couple at my steel plate, WOW! Through the scope i could see one impact that appear to be two shots very close together. There were now only two of those loads left in the box, so i left them for now and went up to the target to check.
Two impacts .560 inch centre to centre! Thats like .175moa LOL. I kinda wish id fired a third now just to see what happened. But i wanted to measure those two up and pull them apart to confirm bullet weight and powder charge weight, which ive now done and have the load details.
Im now keen to load some more up and get out and take a deer with it now.
Bloody neat little shooter me ole mate, i can see why you were so fond of it!
https://uploads.tapatalk-cdn.com/202...872fb31520.jpghttps://uploads.tapatalk-cdn.com/202...be6d843486.jpghttps://uploads.tapatalk-cdn.com/202...4e2f7d3c67.jpghttps://uploads.tapatalk-cdn.com/202...86e5f4de7a.jpg
Awesome stuff it's gone to a good home.Quote:
Originally Posted by GWH
Sent from my CPH1903 using Tapatalk
That's one fine shooter, Wayno would be happy with that.
A post revive. Picked up Tahr's old model 7 that cartman had. Aiming for a light weight rig for Fiordland this season and other hunting. All up weighed in just over 3kg. The laminate stock is 1.1kg of that. Stripped and found it has an alloy shroud which was a nice surprise. Then went to town on the metal. Made a few holes in the bolt handle and magazine. Metal weighs 1941 grams now. Thought of slabbing the action but probably wont bother. Carbon stock to make next and sell a child for a March scope.
Attachment 153638 goimg to cerakote so was a little rough on the edge breaking on pockets.
Attachment 153640
One side done.
Might flute the shroud and the firing pin too. Hoping for 2.4kg with no scope
Shaved shroud. Still a J lock pin. Attachment 153678
Im guessing you cut handle off toothbrush and cutlery??? open sights will be lighter than scope and mounts....
Just eat with hands and dont brush teeth mate.:thumbsup:Quote:
Originally Posted by Micky Duck
Or i just have a cnc mill and time to play!
One of the guys l hunted with in Alaska was a clever bugger with the CNC Mill & made a bolt handle for his M7 that was moddeled off a 1800's silver spoon & shaped like a shaved down airplane wing thicker at the front edge tapering off,sort of a ultra modern version of the old Man licker bolts.He rated it as it did not gather gunk in the scrub & gave good full purchase to work even with gloved hands .Quote:
Originally Posted by robhughes-games
Attachment 153791Attachment 153792
This is my little model 7
Got it from remmodel7 off here.
7mm08
It had a 18" barrel.
However I've since: shortened the barrel to 16" and added a spacer for my lanky arms.
Burris SixX 2-12x40, my DPT can off my 308. Warne rings and mounts.
And for a bush rifle that can reach out on clearings.
I'd say that group is more than enough.
Love that little rifle its such a cute wee thing.
Basically bought it as a rough and tumble dont care if I scratch it in crap bush type of rifle.
Cripes. I wouldn't recognise it now. What weight do you think you will get it down to?Quote:
Originally Posted by robhughes-games
Might be nearly as light as a kimber MontanaQuote:
Originally Posted by Tahr
Sent from my iPhone using Tapatalk
Nice! That will work just fine! What bullet are you running in it?Quote:
Originally Posted by Rock river arms hunter
I have a similar mod 7 7mm08, it was a cheap trademe purchase. When it arrived i was a bit dissapointed in its condition, it was pretty scruffy to be fair. A rough as guts pig hunter had had it and it was quite knocked about.
The alloy trigger guard was squashed flat.
A suppressor had been left on for an ectended period of time and there was some bad corrosion and pitting on the exterior of the barrel. A barrel chop to 15 inch removed nearly all of it.
The stock was very knocked about too. But i fitted another stock i had lying about.
And heres the result. Its now a bloody neat wee gun. Its balanced really nicely and easy to maneuver in the tight stuff.
Im running 140 NBTs at 2700 fps with CFE223 which is pretty good medicine for close to med range hunting.
I shot a fallow at 270 yards with it just over a month ago. And I'd be happy to push it to 400 yds if i had too.https://uploads.tapatalk-cdn.com/202...eb80e6fa3e.jpg
Sent from my SM-G930P using Tapatalk
I run the 160gr TMK at 2430fpsQuote:
Originally Posted by GWH
In going off the theory of a softer heavier weighted bullet with a higher BC. I want to blood something with it haha
Its a good theory mate, same reason i run 162 Amax in my 17" 284.Quote:
Originally Posted by Rock river arms hunter
The metal work doesnt loose much weight. Have a cnc mill and like tinkeringmetal work it 1941g so plus stock and stock hoping for under 3kgQuote:
Originally Posted by Tahr
Could be interested in th 7mm08 if you are selling ? :thumbsup:
that Mowhawk is pure sex.Quote:
Originally Posted by Mohawk .308
Anyone got a spare bolt for one as I need it?
Got the model 7 all done. Load development starts tomorrow. Hopefully done by Sunday and can go verify. Total weight with Sightron S3 6x24 is 3511g.
7mmsaum. The saum isnt the best round for the model 7 with the short mag. Its a hunting rifle so want to mag feed.
Attachment 161874
Attachment 161872Attachment 161873
That will do for now. 2217 with 162amax. 2.184" coal doing 2953fps.
594yrd target. Middle group is 2.7in tall by 1.8 wide.
Attachment 162056
@robhughes-games
Is that a Ken Henderson/Hi-Tec stock?
Did you have to bed it?
Looks great!
Yes had to bed it!!!!!!!!!. Pm me!Quote:
Originally Posted by caberslash
Wow nice
Is anyone running a Leupold VX5HD 2-10 on their Model 7 with Talley rings (30mm tube)?? If so, what height rings did you use to give enough barrel clearance?
Am looking at changing from a Z3, so if anyone has photos of that set-up, it would be much appreciated.
Used Talley 30mm low with a 50mm obj on my 700 and had clearance, but not used them on my mod 7(weaver bases and contessa 30mm low), but it should be fine?
Very nice ��Quote:
Originally Posted by robhughes-games
Interesting the comment about the mag length, my model 7 saum shot best at mag length with everything I tried, both at 22” and now 17.5”. 160tmk seem to work well at a sedate 2745 with a 2” exit at 130yds
