Thread: New rifle, scope question

Your eye is inthe right position when you can see clearly though tne sight with no grey/ black blurriness round the edge.

To check its right you bring the gun up to your shoulder with eyes closed . Then open and your eye should be in the right spot. You'll find ideal mounting is a bit further back forstanding anda bit further forward for lying down. (prone).

You'II need to set the crosshairs Vertical too. set sCOpe to lowest power so the image (exit pupil) it big, Then by eye lookup and down the vertical crosshair to check the Vertical hair goes straight toward the center of the barrel ,

most people mount and adjust their Own scopes.

Everything said above... Nice work gentlemen!

Originally Posted by Bagheera

Your eye is inthe right position when you can see clearly though tne sight with no grey/ black blurriness round the edge.

To check its right you bring the gun up to your shoulder with eyes closed . Then open and your eye should be in the right spot. You'll find ideal mounting is a bit further back forstanding anda bit further forward for lying down. (prone).

You'II need to set the crosshairs Vertical too. set sCOpe to lowest power so the image (exit pupil) it big, Then by eye lookup and down the vertical crosshair to check the Vertical hair goes straight toward the center of the barrel ,

most people mount and adjust their Own scopes.

What I do to get mine vertical is put the gun in the soft jaws of the vice and use a spirit level on the top of the bases (or across any flat horizontal surface on the rifle itself) then make sure it is secured in the vice. Once this is done check that the rifle is still level.
(across the rifle, as forward back along the rifle wont matter while doing this, it will be presumed that the scope rings will end up being parralell to the bore)

The while the scope is slightly loose in the rings, use the spirit level to check the turret on top is also level. (as long as it is flat across the top which most are.). Tighten and check level again. Tightening the screws on one side can "pull" the scope over so this last check is definitely warranted.

Originally Posted by timattalon

What I do to get mine vertical is put the gun in the soft jaws of the vice and use a spirit level on the top of the bases (or across any flat horizontal surface on the rifle itself) then make sure it is secured in the vice. Once this is done check that the rifle is still level.
(across the rifle, as forward back along the rifle wont matter while doing this, it will be presumed that the scope rings will end up being parralell to the bore)

The while the scope is slightly loose in the rings, use the spirit level to check the turret on top is also level. (as long as it is flat across the top which most are.). Tighten and check level again. Tightening the screws on one side can "pull" the scope over so this last check is definitely warranted.

Okay that makes perfect sense thank you! Sounds easy enough. Hopefully can get a hold of some tools to do the job soon. Cheers

Originally Posted by timattalon

What I do to get mine vertical is put the gun in the soft jaws of the vice and use a spirit level on the top of the bases (or across any flat horizontal surface on the rifle itself) then make sure it is secured in the vice. Once this is done check that the rifle is still level.
(across the rifle, as forward back along the rifle wont matter while doing this, it will be presumed that the scope rings will end up being parralell to the bore)

The while the scope is slightly loose in the rings, use the spirit level to check the turret on top is also level. (as long as it is flat across the top which most are.). Tighten and check level again. Tightening the screws on one side can "pull" the scope over so this last check is definitely warranted.

Until you get a rail or some rings machined on the piss this will work

Originally Posted by Gibo

Until you get a rail or some rings machined on the piss this will work

Eyeometer... Every time... Let's not over complicate things..

Originally Posted by Gibo

Until you get a rail or some rings machined on the piss this will work

machined? the rings i got with the scope are lapped. is that the same thing?

okay cool, wont bother with the loctite then

Originally Posted by TheJanitar

machined? the rings i got with the scope are lapped. is that the same thing?

okay cool, wont bother with the loctite then

There can be a number of things that affect alignment. The action could be out, the bases could be out of alignment, mounting screws on action for bases or rail could be out of true, the rail could be machined out of true.

But in general terms its not something to worry about, but you might if you get into long range.

All I mean is I personally don't solely rely on the mounts being true to set up my scopes. I use levels, plumbs and eycometer

The end goal is to get the vertical line of the scopes cross hair perfectly in line with the vertical centre of the bore

before i make a new thread.. posting this question here.

Is there anyone in the southern auckland region that may be able to help me sort my scope and sight in my rifle? Was gonna make a separate thread about sighting it in but i thought itll be a better idea to get that done and sort the scope at the same time with an an experienced hunter/shooter's help. (And dont worry, Only need to be shown this one time then im sorted ) Dont wanna "screw" things up, as i realized it can be an expensive mistake.. Will save me so much hassle with gun ranges and gunsmiths if someone on here who knows what theyre doing might be able to help. BIG PLEASE guys

And thanks for everyones input thus far! much appreciated

Originally Posted by TheJanitar

before i make a new thread.. posting this question here.

Is there anyone in the southern auckland region that may be able to help me sort my scope and sight in my rifle? Was gonna make a separate thread about sighting it in but i thought itll be a better idea to get that done and sort the scope at the same time with an an experienced hunter/shooter's help. (And dont worry, Only need to be shown this one time then im sorted ) Dont wanna "screw" things up, as i realized it can be an expensive mistake.. Will save me so much hassle with gun ranges and gunsmiths if someone on here who knows what theyre doing might be able to help. BIG PLEASE guys

And thanks for everyones input thus far! much appreciated

And can you help the young bugga in the next week or so..I've promised him I'll take him bush ..it'd be good if he can shoot his first deer with the new rifle...

Originally Posted by TheJanitar

before i make a new thread.. posting this question here.

Is there anyone in the southern auckland region that may be able to help me sort my scope and sight in my rifle? Was gonna make a separate thread about sighting it in but i thought itll be a better idea to get that done and sort the scope at the same time with an an experienced hunter/shooter's help. (And dont worry, Only need to be shown this one time then im sorted ) Dont wanna "screw" things up, as i realized it can be an expensive mistake.. Will save me so much hassle with gun ranges and gunsmiths if someone on here who knows what theyre doing might be able to help. BIG PLEASE guys

And thanks for everyones input thus far! much appreciated

Yes, I'm in Sth Akl, and have a Wheeler Fat wrench, Torx bits, and a scope level.

Send me a PM

B

Originally Posted by shift14

Yes, I'm in Sth Akl, and have a Wheeler Fat wrench, Torx bits, and a scope level.

Send me a PM

B

Good old Uncle B.
Hurry up and sell me that range.....