Look for a new CF rifle from Tikka , & a new rimfire rifle from Sako later this year .
Printable View
Look for a new CF rifle from Tikka , & a new rimfire rifle from Sako later this year .
CF = Controlled feed? or something else?
Crappy factory?
Sent from my SM-G800Y using Tapatalk
source?
More info please @ChrisF
nah - copper fouling, now that'd be a winner
Obviously nothing mentionned at the shot show.
It seems the guys in Europe have been told to expect them , and it seems that the Europeans do most of their new product releases later in the yr at the European show IWA ( and not at Shot show in the USA ) , so its seems that if the rumours are correct then look for info following the IWA show this year .
Thats all the info I have .
Yes , CF is centerfire
We talked about it on another post on this forum a few months ago. Your info is second hand Chris ;-)
I've heard on the grape vine that some time during 2016 there is a second hand (but in perfect condition of course) Tika 7/08 going to be sold on Trade Me. The shooting press is pretty excited, but Tika are staying tight lipped about it.
Yeap , I love Blasers ? , and especially the plastic washer that holds them all together , NICE , sort of like leaving the breeching/locking insert out of a AI AW , but then even if you did that the slot for the bolt handle will hold the bolt in place , and the bolt will not be blasted back into your face .
Yeap , and all those Blaser photos on the net of owners eating the bolt from thier Blaser wunder rifles are photo shopped and not true , also not true that the Brits rejected the Blaser in thier sniper rifle trials , as it was deemed un-safe in operation ,
They say the T3 is toast. That is why they are selling like hotcakes around the world.
Right here bro. Got a BC (burger coefficient) of 2. (2pp)http://uploads.tapatalk-cdn.com/2016...63e90b6d1a.jpg
Sent from my SM-G920I using Tapatalk
On me way
Just been to a bad mva and have a hunger
Sent from my iPad using Tapatalk
Little morbid? Got an interest in cannibalism?
I have no photos of the plastic washer or ring used to cam the locking fingers into place , heard that after a few failures they changed the 338LM model to steel , what seems to be the issue was when gas from a blown primer vents back down the firing pin hole and cuts/melts this washer/ring that cams the fingers into place , when that happens , then basically you have a un-locked bolt during the firing phase .
RE : The Accuracy international AW rifle , yes some how a rifle did get assembled with out the breeching/locking insert , and was test fired , opps , but due to the design of the bolt handle slot , the bolt held in place and did not bite the user , so yeap thats happened .
Swazi man , use to use Blaser rifles a lot , until his 300Weatherby mag rifle blew the barrel .
The Aussie Army is one of the few Armies that use the Blaser R93 in 338LM , they did a emergency type buy , and did not do a full trial , a year ago they had some problems with the Blasers , not sure what they where , maybe safety mech problems like what the Brits had or worse .
All this is second hand info & was not personally witnessed by me , so maybe none of ever happened .
The only photo I have seen of a Accuracy International rifle with a blown barrel , was a AW50F , ie the big 50 BMG bolt action rifle , do a search its a good photo , barrel is split really good , looks like the barrel steel gave away , and it did , but not due to poor grade steel or manufacture , the bolt held and the firer did not have the bolt move back . AI did tests and found out , that the rifle had been fired and then cleaned and then fired again .
They were using exposive ammo , and a patch had been left in the barrel ( so the barrel was blocked ) and then fired with that ammo , so operator error , not a faulty rifle .
You should write fiction or sell ammo full time.
The ammo you provide is fcuken cheap.
And you tell a good story.😆
Sent from my SM-G900F using Tapatalk
It will be interesting to see what comes out , me , I would like them to re-make the P94S again , but somehow I doubt thats going to happen .
I have fired thousands of rounds thru one Brads.
While accurate, it was the most cumbersome piece of shit you could use in a green role environment.
It raised your profile by design, was longer than most artillery, it weighed a ton and caught up on everything in existence because of all its box edges.
My 93 and a bag of washers runs rings around one in all those departments and is every bit if not more accurate.
Sent from my SM-G900F using Tapatalk
I suspect ChrisF's rebuttal will be good[emoji106]
Sent from my iPhone using Tapatalk
Good as in funny
My father said almost exactly the same thing about them... in fact he says that about a lot of the new sniper rifles and how he would hate to have to crawl through a stalk with one because of their weight and how they would get caught up on things. Hawkins seems to be a much less utilised shooting position these days...
Superbly accurate though.
I think your old man is still the only non infantry or SF person to pass the unit course on record, let alone top it.
It took me more than one go because my observation and navigation was shit.
Ask him what he shot on his initial badge test.
Sent from my SM-G900F using Tapatalk