Been offered a Weaver RV-7 rimfire scope what I would like to use on a 30-30. Would it stand up for the recoil? Just 150 gr low vel loads no ftx or heavy loads.
Printable View
Been offered a Weaver RV-7 rimfire scope what I would like to use on a 30-30. Would it stand up for the recoil? Just 150 gr low vel loads no ftx or heavy loads.
Yeah. Nah. There are Centrefire scopes similarly sized. Do it right first time
Its a good brand can't see why it wouldn't work I use air rifle scopes on some of my centre fires without any problems
Air rifle scopes are normally made a lot stronger than rim fire scopes. Those springer air rifles produce a fair rattle.
"Rimfire" probably indicates a nearer parallax setting also.
As Timmay says its probably more of a parallax setting issue than anything else-and rimfire parallax settings would seem better on a 3030 than most centerfire settings
Parrallax probably wont matter on a 3030 especially if its top eject and has a side mount.
air rifle scopes are tougher than centerfire scopes due to the spring powered air rifles being very tough on scopes a normal scope on a "spring" air rifle would be shaken to bitsQuote:
Originally Posted by northdude
The backward(normal) then rapid forward (abnormal) recoil of high power springers just fucks cheap rimfire scopes.Quote:
Originally Posted by rambo-6mmrem
Sent from my SM-G800Y using Tapatalk
personally I would stick with a proper centerfire scope
I have a compact sightron(big sky?)11 4x32 here I'm not using be awesome for a 30-30 I was going to keep it as a spare but if you realy need a good scope pm me and we might be able to help you out if that's ok with @Barefoot the guy who helped me out with it when I was the one in need
even low end cente rfire scopes never tried it with a good one don't have that sort of money to chuck awayQuote:
Originally Posted by veitnamcam
I shoot pcps so don't have recoil issues to contend with but an ao or side focus with a min distance of 10m not 50 like most scopes is a bonus of an proper airgun scope
Killed a vx3 on a springer a few years back, was very annoyedQuote:
Originally Posted by rambo-6mmrem
At least if genuine it would have been fully covered under warrenty [emoji41] [emoji106]Quote:
Originally Posted by res
Sent from my SM-G800Y using Tapatalk
It's fine by me if you want to pass it on Rambo.Quote:
Originally Posted by rambo-6mmrem
Good strong scope, with fully multi coated optics. Bult by Light Optics in Japan. Same optical quality as the V9 tested by Tracey Short a while back for Duley's magazine but slightly more rugged.Quote:
Originally Posted by Boar Freak
Thanks for the input guys.
Quote:
Originally Posted by res
Not always. If it considered outside what it was designed for then they have the right to say no. And big springers are VERY hard on scopes. There are very few that can handle the vibration. Springers can dish out more damage than 50BMG because it is a sustained vibration as well as the jolt. We had a Webly dominator we tried to scope up. After about 6 shots there were parts of the scope physically falling off and it was a very well made expensive scope. I wont name brands because from what we saw, no brand could handle that and be expected to last.Quote:
Originally Posted by veitnamcam
With companies like Weaver and Leupold, the "rimfire" designation refers to the focal length and a "Rimfire" scope is set to around 50 yards mostly rather than a traditional "normal" centrefire scope which is usually closer to 100 or 120 yards. I used a rimfire scope on a 7.62x39 with a great deal of success. Ideal for a 30/30. Bear in mind a shit scope that wont handle recoil will likely be no better for rimfire anyway. Lifes gentle bumps will see to that so stick to a decent brand that you know and you will be fine. That weaver would be ideal.Quote:
Originally Posted by res
You are not wrong!!!!!!!Quote:
Originally Posted by gadgetman
What air rifle scope would you reccomend?.Quote:
Originally Posted by timattalon
I have a big springer still unscoped and unfired.
Sent from my SM-G388F using Tapatalk
The Nikko Airkings are not too bad.Quote:
Originally Posted by veitnamcam
Hawke there is no other I have hawke's on all my air guns they are not to bad on price a 3-9 will be about 200 new maybe less the 6-24 with 30mm tube and all the bells and whistles is under 800 which is bloody good for a scope of that higher quality
Indded. They are built with the vibrations in mind, but even these did not handle the dominator. (1350 FPS springer by Webley)Quote:
Originally Posted by gadgetman
Sounds like the sort you just need to use open sights. Glad I went with a multi pump Sharp Innova clone (made under license).Quote:
Originally Posted by timattalon
In all honesty, we have not found a scope that can survive the vibrations of a big springer. I cannot say about the Hawkes as I have never tried one, but I can say that they need to be very robust and sturdy. What usually goes first is the internal mechanism for adjustment as the heavy vibrations are like giving the scope a beating. What we normally suggest, however, at the distances these are usually effective to, peep sights etc are often a better way to go. In most cases we see, where these are purchased for hunting / pest control it is mostly for one of two reasons: Close proximity to buildings and not safe to use a 22 in which case peep sights are very suitable or ; Owner cannot get a FA license.Quote:
Originally Posted by veitnamcam
Most of these big springers are beaten by a 22LR. A 22 is usually much cheaper, will be lighter and shorter, easier to carry, more accurate and more effective. But if you are in a situation where a 22 is not possible, (small lifestyle type block for example) then an air gun is of some use. But the really big springers tend to be too loud in these situations where there are neighbours in close proximity too.
When the power gets up then better to go gas piston, multi pump or pcp to keep this a bit more manageable. Really impressed with the multi pump, it is slow for a follow up shot but it is so nice and quiet to shoot with basically no recoil.Quote:
Originally Posted by timattalon
Once you've written off two good scopes on a springer, a PCP will start to look attractive :(
Hawke scopes are good on springers.
Have a chat with Ron at Youngs Air Guns, he'll put you right. Or Ken at Magair.
that's why I no longer own a springer pcps are the way to go but then you need a fal to own one which is the advantage of a springerQuote:
Originally Posted by 6x47
there is a stupid law that says you don't need a fal for a pcp pistol which is wrong especially when I know of guys guys running 38cal ones at about the same grunt as a 38spl
You're preaching to the converted on PCPs Rambo.
Levelled a maggie at 86yds yesterday- stone dead. A centrefire wouldn't have killed it any deader or more quickly.