Thread: Ruger 10/22 - Tricks, tips and modifications

Originally Posted by gundoc

Just cut the extension tongue off the latest factory catches, pretty it up with a file and sandpaper, and you have a flush mag release. End of problem! Tight magazines need dressing a little on the 4 vertical corners. A 1mm 45 degree chamfer cut with a sharp chisel will do the trick.

My problem isn't the mags it's the mag well as its only occurred since I had the bolt put in the receiver, has aimed the barrel up a bit, suspect that's why my safety doesn't work as well. Will try your idea of altering mags