If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Only had this one for a short while but the first thing that struck me was how clear it was at 25x mag its on Par with the Zeiss V6, at least in normal light conditions, the Zeiss might beat it in lower light, I'd be disappointed if it didn't. The crosshair is good its just the right thickness for fine work but has a really good illumination which covers not just the centre of the reticle but extends about 1/2 way out, there is no flare off the illumination its very good. The zero stop take a bit of working out but once you have that sorted then I think its a good system. Clicks are positive and tracking seems fine. One good thing about the zero stop setup in these scopes is once you have it set to so called "zeroing mode" you have no clicks so you can work with really fine adjustment using just the friction of the elevation dial. Also comes with a screw on sunshade which is a nice touch.
Do you run yours with a rail? I'm looking at mounting to a remington 700 and prefer the look of mounting with Talley rings. Would I still get at least 30 MOA adjustment on 0 MOA rings?
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks