Thread: shimming scope rings confusion

Originally Posted by ebf

get some Burris Signature Zee rings with inserts

is your scope 1 inch or 30mm tube ?

+1
They are a brilliant piece of kit in my opinion .
The only downside is that they don't make a Low mount , only Med and High .
All of my scopes except one have Burris Zee rings .
The other one uses old fashion Weaver rings ( the band type with screws on one side ) they are the lowest rings I could find to bring the scope right down on my Blaser 223 barrel . The cocking - safety just clears the scope by a couple of ciggee papers now . It's a low as you can get a scope on a R93 .
I only wish Burris would take note and produce a Low Zee mount .
When setting up a scope with the inserts I make sure the scope is centred in its adjustments and then adjusting the inserts Not the scope I bore sight it to as good as I can get it . Using this technique I've never had to adjust more than about 10 clicks maximum in any direction to be smack on at 200 .
I highly recommend the Burris rings with inserts .


Ken