I have seated my tikka 260rem to far to fit in the mag, does any one have any links or anything to a d.i.y fix. Spent to much lately any advice is appreciated.
Printable View
I have seated my tikka 260rem to far to fit in the mag, does any one have any links or anything to a d.i.y fix. Spent to much lately any advice is appreciated.
You can just cut out the inner web section. It will still feed fine with the now too short follower.
I guess you mean the projectile is seated too far out, you could reduce the oal to fit, try out a 6.5x55 mag it may give enough extra length, or bubba the follower as msl suggests
Pop off the bottom of the magazine. From memory you will see a couple, 4(?) small circles just above the base. Push the plugs in and take the bottom off. The. You will see the space in the rear of the magazine. Cut/dremel the spacer out and reassemble. If that sounds. Out hard then just buy a long one. Will need to get/change the bolt stop as well. I think Gunworks sell long ones.
As above, long bolt stop & a 270, 6.5x55 size mag works best if you want to save the work.
I came up with a new follower and spacer to lengthen 223 magazines, works really well and has the benefit of being able to single load also.
Only reason I spent the time and effort doing this is because you can use the medium magazine (308,243 etc) for 223.
For a 260 I would just go buy a longer magazine, heaps easier and will look better.
Buy a longer one cheap from this (below) website and sell the shorter one here or on Trademe, then modify your bolt stop.
https://tikkaperformance.com/index.p...tikka-magazine
I have made one for my 260 out of a long action 5 shot mag. Cut the follower and fitted a spacer made from nylon in the back and it works great with the med action bolt throw.
@Beetroot how did you modify the feed lips to hold the 223 rounds in the med length mag? The 223 mag has narrower feed lips.
@blair993 I modified the standard 223 magazine.
Here's a thread I started with all the information about it, used it the other day without even realizing it was the modified magazine and if worked perfectly.
https://www.nzhuntingandshooting.co....ine-mod-27848/
ok you had said you can use the med length mag for 223 and couldn't see how.
"Only reason I spent the time and effort doing this is because you can use the medium magazine (308,243 etc) for 223. "
@Beetroot lol. i was confused.Attachment 78132
the long action on the rhs with the green nylon spacer is a 5 shot will still feed out of a med action and coal is longer than it needs to be. my 140eldms are about 71.58mm.
hey ive been thinking with my 260rem seated out to far, can i use my 7mm rem mag magazine. by the looks its the same as the 270, 3006 one etc?
Feedlots on 7mm mag are probably a bit far apart for the 260. A 270 or 30/06 will work better.
Theres only 3 options short med and long. Get a long and fit a spacer in the back. Boom done. Will take a couple of pics tonight of it all apart.
sorry forgot will try tomorrow
Just get a LA mag and bolt stop. End of story - don't waste your time modifying one.
My 7/08 is just that ^ - you've seen how it functions.