Thread: Weatherby Backcountry Ti 2.0

I suppose it is like the top Bergara premier models made in USA. Not for us.

The importer of bergara ( nz Asia ) might note have all the caliber options in the premier range, but they definitely did import some , as I had a chance to work on a few of them.

They have just released a Remington footprint action as well, which it looks like they will sell as an action only. Interesting to see if they make it this far

Originally Posted by Friwi

The importer of bergara ( nz Asia ) might note have all the caliber options in the premier range, but they definitely did import some , as I had a chance to work on a few of them.

@Friwi

I should have been more specific, they have some premier models such as the Mountain 2.0 (which has limited caliber options as you say) but some of the other higher end premier models they are not authorised to such as the Bergara Premier Canyon and Premier Approach. Stainless high spec rifles that would have a market here.

NZAsia is trying to get them but they have to source their rifles from Bergara Europe vs Bergara USA where a lot of the higher end stainless Premier rifles are made...which is not something they can do...at the moment. Hopefully this will change.

@Friwi did you do the work on JE Wilds' Premier Mountain 2.0 carbon rifle?

I've seen it on YouTube on his channel with one of your suppressors on it. Seems to have much less recoil than I thought such a lightweight 300wm would have. Did you get a chance to shoot it ?

Originally Posted by 308mate

@Friwi did you do the work on JE Wilds' Premier Mountain 2.0 carbon rifle?

I've seen it on YouTube on his channel with one of your suppressors on it. Seems to have much less recoil than I thought such a lightweight 300wm would have. Did you get a chance to shoot it ?

Their not that light in the ballpark of a standard t3x which I find very manageable with a mk11 dpt can. Just awsome cans mate

@Kelton appreciate that and agree, dpt mk2 tames my 308 xbolt (2.7kg /5lb 15oz bare) with lightweight rings and a little z6i 1-6 to a very comfortable recoil level....but a 300 wm is a lot more power/recoil than a 308 in a mountain 2.0 that is only a little bit heavier at 6.2 - 6.4lb. Just surprises me it looks so light recoiling in the JE Wilds videos.

Originally Posted by 308mate

@Kelton appreciate that and agree, dpt mk2 tames my 308 xbolt (2.7kg /5lb 15oz bare) with lightweight rings and a little z6i 1-6 to a very comfortable recoil level....but a 300 wm is a lot more power/recoil than a 308 in a mountain 2.0 that is only a little bit heavier at 6.2 - 6.4lb. Just surprises me it looks so light recoiling in the JE Wilds videos.

Im referring to a 300em t3x aswell mate i find them a pushing cartridge not snapping my saum is 7.5 pounds with vx5 dpt can and bipod its alot snappier than the 300wm with the same cans

Originally Posted by Kelton

Im referring to a 300em t3x aswell mate i find them a pushing cartridge not snapping my saum is 7.5 pounds with vx5 dpt can and bipod its alot snappier than the 300wm with the same cans

Interesting. I saw your SAUM when you posted up a pic if it looking to swap your March scope. A real beauty but I did wonder about the recoil as it looked light.

I'd like to buy a lightish 6 -7lb bare rifle magnum in 7mm remmag or 300wm and run a magnum dpt with VX5 but was a bit unsure what such a light rifle would recoil like.

I do not think I did a rifle directly for je wild, but the importer might have sent it to us to do, and me not knowing it was for him.
I have suppressed several of those mountain carbon stock rifles over the last few years.

Originally Posted by 308mate

Interesting. I saw your SAUM when you posted up a pic if it looking to swap your March scope. A real beauty but I did wonder about the recoil as it looked light.

I'd like to buy a lightish 6 -7lb bare rifle magnum in 7mm remmag or 300wm and run a magnum dpt with VX5 but was a bit unsure what such a light rifle would recoil like.

7 mm mag will be a kitten at that weight and 300wm is very recoil adjustable depending on bullet weight id not hesitate just get into it only one way to find out

New toy finally arrived after what seemed like waiting forever


Backcountry Ti 280ai, first impressions, she's very very nice, feels n shoulders lovely, great weight - balance & lighter that advertised @ 2209g / 4lb 13.75 oz


Now to sort a scope n do some shooting - report to follow

Originally Posted by Philipo

New toy finally arrived after what seemed like waiting forever


Backcountry Ti 280ai, first impressions, she's very very nice, feels n shoulders lovely, great weight - balance & lighter that advertised @ 2209g / 4lb 13.75 oz


Now to sort a scope n do some shooting - report to follow



Attachment 287503

Very nice

Sent from my CPH2531 using Tapatalk

dayummm @Philipo thats a sexy bitch......Now I need to sort carbon stocks for bot my mk v's thanks a lot

Nice shooter Phillipo