What lube do you use on a fishing reel on the parts that may come in contact with the nylon line?
Printable View
What lube do you use on a fishing reel on the parts that may come in contact with the nylon line?
Nothing, any lube will attract dust and increase wear, clean well with warm water to remove salt and wipe dry, oil, grease internal parts, and wipe housing/ casing dry with a rag, once in a while i may put a little light weight oil on the rag and polish housings, marine spay, gun oil, hyd oil etc. keep oil of nylon,
Ok. Newish to the fishing thing. The wire thing that flips over the reel is a bit sticky and it has a little rotating guide roller thing on it thats the same.
Release the tension on the roller screw and brush on some inox on in there - I never spray it as it can go places you don't want it to, always use a fine brush, or back the screw out and remove the bearing in the roller (if it has one) and check the bearing over, can add some reel grease to the bearing upon reinstall
+1 for Inox.
yup Inox - completly agree with Gibo- that line roller on fixed spools must be lubricated - fishing with an old mate from Kaitaia and his was seized and had a groove in it that chopped his line repeatedly - I do spray it in but wipe reel carefully afterwards and remove spool so it does not go onto nylon - and guys try to buy a new roller for most reels damn near impossible to get parts for lots of reels especially earlier shimano trust me I knowQuote:
Originally Posted by Gibo
Only reason I brush and not spray is because my reels are Daiwa with Mag seal, inox is not good a good combo with that mag seal grease
Roller itself if in good shape wont need replacing, any good fishing shop can get replacement bearingsQuote:
Originally Posted by Barry the hunter
Cool thanks guys
Was going to use some graphite but ive got inox as well