Thread: 303 group-bad bedding?

Originally Posted by csmiffy

That pic is from my project thread. there is actually a hole drilled down towards the pistol grip along the length of the crack.
I spread the stock a bit and used the epoxy same as I used for the plugs and glued a length of 6mm threaded rod in there. You can just see the top of the hole.
I haven't refinished the stock yet as I was going to do that after bedding otherwise that crack would be far less visible.
There is also an alloy pillar that I threaded into the stock there now which was fitted after that pic.
@Carlsen Highway regardless I still reckon I have to bite the bullet and at least have a crack at the bedding. I don't remember it being super snug in there.

Do it then, you can't hurt it.