Thread: Let's see those 284s

No just the 150 gameking and 150 eldx as I has them left over from my 7mm08. I suspect i have a shallow throated chamber my gameking load is only 2.908 coal with about 10thou off the lands.

Originally Posted by tonyd

No just the 150 gameking and 150 eldx as I has them left over from my 7mm08. I suspect i have a shallow throated chamber my gameking load is only 2.908 coal with about 10thou off the lands.

Does sound short. The 150's are a good match. You should see some good speed out of them. I've been thinking of trying the 150 eld-x.

Sent from my SM-G920I using Tapatalk

Originally Posted by tonyd

No just the 150 gameking and 150 eldx as I has them left over from my 7mm08. I suspect i have a shallow throated chamber my gameking load is only 2.908 coal with about 10thou off the lands.

the elds would be well into the case at that COAL...getting good loads without pressure signs?

Originally Posted by stevodog

the elds would be well into the case at that COAL...getting good loads without pressure signs?

my eldx load is 3.050 and is roughly 15 off the lands but not 100% sure of that as its not that accurate measuring seating depth with a cleaning rod, try it 5 times and get 5 different measurements... im currently just waiting on someone to tap out a case to fit onto a guage tool then i can do some accurate seating testing.