The Practical Guide to Long Range Hunting Rifles

Who is this fella? I see stuff I have read elsewhere, under different names?
Lost all and any interest from me anyway, when I read a link saying you need to bed Blaser stocks when heavier barrels are used, due to weight they impart forward of the receiver:wtfsmilie:
How the hell would you bed an R93/R8 stock any better without fucking it anyway?

He must know more than the Germans that have won awards for their innovation?
The world foremost online resourse? Really?

An accurate rifle design is easy. Blaser have done it slightly different to coventional rifles but have enhanced and employed all the requirements to ensure their rifles are, across the board.

Another copy/paste expert Dave?

its nathan foster from Terminal Ballistics Research he lives in taranaki. has the knowledgebase on heaps of cartridges. most of his stuff is pretty sound?

Most his stuff (his ballistic data base anyway) is copy and pasted. He can obviously hit stuff a long way away but most of his veiws i dont really follow. And as fornhe blaser which i know nothing about but when I think of a T2 i would love to see someone bed them foward of the reciever

Sent from my GT-I9300 using Tapatalk 2

Quote:

---

Originally Posted by veitnamcam

Another copy/paste expert Dave?

---

Not sure, it is the first I have heard of him. I have seen some links and I am sure I have read the same stuff before.
I just dont understand why you would make ridiculous suggestions like bedding a blaser system. Yeah you will get ones that dont shoot like any other brand but I bet your bottom dollar its the barrel, not the system or its fitting to the stock.
Probably not being fair in general, but as it was the first thing I read, the author lost all credibility with me. I would suggest a lack of experience on the system, therefore should have said nothing about it.

Why don't you email him or post on one of the blogs at his website? He seems like a pretty genuine and approachable guy - you might be able to reach a common understanding:ORLY:

Have you read what he wrote about the Accuracy international chassis?

I've got the book if anyone wants to borrow it.:)

Na. Just spoke with someone who's opinion I trust way more than this blokes on the matter and I am satisfied with my observations.

It is truly ridiculous IMO to suggest bedding any R93/R8 blaser system. One quick look at one will tell you that.

I read that bit too Dave. Fucktard sprang to mind

Oh I see the problem... He was actually banging on about a Blazer which is obviously quite different from our Blasers because the thing he was looking at apparently grouped like shite and lacked an aluminium bedding block in the stock and my Blasers are tack-drivers and have an aluminium bedding block insert in both the safari stock and the off-road one. That Blazer thing must be some shit-arse poor mans copy of a proper european rifle... ;)

And check out his MOA comprehension issues from his dissertation on the Titan.... "the Titan cannot be expected to group less than 3MOA at 100 yards"

Ray.

Quote:

---

Originally Posted by kiwijames

I read that bit too Dave. Fucktard sprang to mind

---

I've never met this guy (Nathan Foster) so I can't comment on him or his book, but that word highlighted above is so under used in our society, magic stuff James - I can't stop laughing.

It's a universal favourite of mine.

He is a nice guy to talk to...but what twists my nickers is he posts a lot of second hand info posted as facts.... I have read some of his views and lots are very very similar to others I have read that then down the track change there mind like he will when he gets around to reading it I guess.

There is also info about bedding other brands that flies in the face of every other bit of info I have read before.. His bedding compound varies in consistency so much I wont touch it now... Devon all the way now :)

I didn't seam very long between asking about how you do things on the phone to holding talks at hunting shops :wtfsmilie:

People are so quick to get out there and slag him off. I listen to what he has to say because he is out there doing it far far more than nearly every person on this forum, not surfing forums as though he is an expert.

It seems a bit rich that he gets a hard time from people on forums about copy/paste info on his site when we do it all the time and act like we came to the conclusions ourselves when really we just read somebody's opinion on another site and agreed with it.

Quote:

---

Originally Posted by Savage1

People are so quick to get out there and slag him off. I listen to what he has to say because he is out there doing it far far more than nearly every person on this forum, not surfing forums as though he is an expert.

It seems a bit rich that he gets a hard time from people on forums about copy/paste info on his site when we do it all the time and act like we came to the conclusions ourselves when really we just read somebody's opinion on another site and agreed with it.

---

Jeez, savage you might have the forums mixed up? How do you know who gets up to what on this forum. I havent seen anyone here professing to be an expert either? That bloke Nathan does tho.
Opinions will differ of course, but your way off the mark generalising people on here. Hes out there doing it? I can bet your fucking life I have fired more deliberate LR shots than this bloke ever would, so what? And he most likely helped pay for it, if he ever pays taxes. Whats that universal word you like again James?
You seem to bite the other side of the pie on just about every issue on here savage. If your opinion is so low of this forum maybe you can kick his one in the guts. It seriously needs a boost.

What I'd like to know is exactly what point does a shooter look at his rifle and say "not accurate enough". I mean are we talking guys wanting 1/4" MOA or is 1/2" ok? I'm all for tweeking things but surely this is a drastic thing to do isnt it. Tearing up your warranty and creating a must pay issue when ever something little fails on your rifle.

Is the barrel shoot-in period far more important than bedding?

Quote:

---

Originally Posted by Savage1

People are so quick to get out there and slag him off. I listen to what he has to say because he is out there doing it far far more than nearly every person on this forum, not surfing forums as though he is an expert.

It seems a bit rich that he gets a hard time from people on forums about copy/paste info on his site when we do it all the time and act like we came to the conclusions ourselves when really we just read somebody's opinion on another site and agreed with it.

---

I think you will find most on here post from experience but if copy/pasting something interesting openly say so.

Quote:

---

Originally Posted by R93

Jeez, savage you might have the forums mixed up? How do you know who gets up to what on this forum. I havent seen anyone here proffessing to be an expert either? That bloke Nathan does tho.
Opinions will differ of course, but your way off the mark generalising people on here. Hes out there doing it? I can bet your fucking life I have fired more deliberate LR shots than this bloke ever would, so what? And he most likely helped pay for it, if he ever pays taxes. Whats that universal word you like again James?
You seem to bite the other side of the pie on just about every issue on here savage. If your opinion is so low of this forum maybe you can kick his one in the guts. It seriously needs a boost.

---

Yeah that kinda didn't come out the way I meant it to.

Most people shoot as a hobby and work in another industry, Nathan works/lives in the industry so I don't think my generalisation would be far off the mark regardless. You MAY have fired more LR shots but are you still firing more shots than him? With that kind of logic you would know more than anybody. Have you bedded more rifles than him?

Who is James?

People forget about the other side of the pie and somebody needs to remind them that it's there every now and then.

I have quite a high opinion of this forum and the people on it, much better than the Fishhunt one. Yes my previous comment would have fit much better over there sorry.

Quote:

---

Originally Posted by Dead is better

What I'd like to know is exactly what point does a shooter look at his rifle and say "not accurate enough". I mean are we talking guys wanting 1/4" MOA or is 1/2" ok? I'm all for tweeking things but surely this is a drastic thing to do isnt it. Tearing up your warranty and creating a must pay issue when ever something little fails on your rifle.

Is the barrel shoot-in period far more important than bedding?

---

My main hunting rifle (factory) will shoot 1/4 with a load that is only good for paper. The two loads i use for hunting are 3/4 to1moa because its enough for the use altho others shoot better but have had bad experiences with bullet construction.
The wifes 800 dollar second hand rifle shoots well under half after bedding:wtfsmilie:

Quote:

---

Originally Posted by Dead is better

What I'd like to know is exactly what point does a shooter look at his rifle and say "not accurate enough". I mean are we talking guys wanting 1/4" MOA or is 1/2" ok? I'm all for tweeking things but surely this is a drastic thing to do isnt it. Tearing up your warranty and creating a must pay issue when ever something little fails on your rifle.

Is the barrel shoot-in period far more important than bedding?

---

I think half inch should be the minimum accuracy sought from a custom build mate. It is experience and personal preference as to what individuals will be satisfied with. Bedding is IMO way more important than running in a barrel. I have never ever run a barrel in like what is considered conventional. Only had my first new custom barrel that would not shoot just recently, out of many. Never had any issues prior to that barrel at all.
If a barrel is going to shoot, it will from the start in my experience.

why all the hate on Nathan? nathans the real deal, ease up on him. Ive seen his videos where he shoots goats easily at over 1000 yards. Ive talked to him persoanlly and watched some of his long range vids. . to me it makes him an expert if he can compentetly and cleanly take game out at that kinda distance. a few of u guys on here probably can too. cool post up your vids.
Everytime Ive talked to him hes been awesome as, knowlegable and friendly and his advice has been spot on.
As for the copy and paste shit, have you guys even read the information the guys compiled there? its goes through the cartridge history, good loads, what size game its ideal for,wounding, everything. pretty thorough shit. even to copy and paste that and compile alltogether would take fuckn months, and i highly doubt he just wikipedia'd that shit. ive yet to see a better clearer cartridge by cartridge analysis anywhere on the net

Sorry! You all can get back to dusting off his throne. I just felt the need to point out this man of all things shooting and hunting knows fuck all about
Blasers:D
I will scurry back to my cave that I share with all the other people that dont have a clue, because we dont have a thriving business in the industry.:2 z Z:

Quote:

---

Originally Posted by Savage1

People are so quick to get out there and slag him off. I listen to what he has to say because he is out there doing it far far more than nearly every person on this forum, not surfing forums as though he is an expert.

It seems a bit rich that he gets a hard time from people on forums about copy/paste info on his site when we do it all the time and act like we came to the conclusions ourselves when really we just read somebody's opinion on another site and agreed with it.

---

You may be surprised at just how many animals some people hunted, culled on here..... just because they don't post a story doesn't mean they haven't been out, a story is useless without pics so those that don't take a camera generally don't post stories.... and I guess he is not on many forums as he has his own forum and web site to keep going :P

as for the copy/past... yup that's fine, on here we are not selling books containing that info but offering up info for free.... and most people put them in quotes or say where they got the info so it doesn't look like the person wrote it all...

I know jack shit about LR shooting so won't comment except I can't understand the need to bed a rifle that cost more than a Sako (cringe)

Fucktard is high in my vocabulary when driving

Enjoying this thread. It is also top of the pops on another forum. I know nothing about the guy one way or tother but he obviously polarises people.

Quote:

---

Originally Posted by Savage1

Who is James? Me:thumbsup:

I have quite a high opinion of this forum and the people on it, much better than the Fishhunt one. Yes my previous comment would have fit much better over there sorry.

---

No need to be sorry either. Us Blaser owners are a tisky bunch and don't like our precious pop guns talked about in a poor light.

I read a bit of his stuff a while ago. According to his writings I'm a "hotshot with my baseball cap on backwards" shooting a rifle that won't do any better than 3moa at 100yds in a cal that often won't penetrate a boars shield with standard projectiles. Stoke up the fire in that cave R93 I don't like the cold.
At leasts he didn't call bullets "pills"

I don't own his book or have had a rifle accurised by him but I have had a few conversations with him. I got the impression he's a straight up, fairly knowledable character - like others a few topics I'd have to "agree to disagree" on. At the end of the day he has his own beliefs & his followers - they'll buy his book if they agree.

Personally I think Blaser's are "Butt Ugly" but even I am going to eventually give in and purchase one sometime soon as they are one of the most practical, versaltile & consistent rifle packages around. They pack down into a tiny case & almost allways trackdrivers right out of the box.

Quote:

---

Originally Posted by sneeze

I read a bit of his stuff a while ago. According to his writings I'm a "hotshot with my baseball cap on backwards" shooting a rifle that won't do any better than 3moa at 100yds in a cal that often won't penetrate a boars shield with standard projectiles. Stoke up the fire in that cave R93 I don't like the cold.
At leasts he didn't call bullets "pills"

---

No worries sneeze I have just finished knawing on a wee buck skin matt for ya. I promise I will not Talk about pills.......I mean projectiles:D

Quote:

---

Originally Posted by LJP

I don't own his book or have had a rifle accurised by him but I have had a few conversations with him. I got the impression he's a straight up, fairly knowledable character - like others a few topics I'd have to "agree to disagree" on. At the end of the day he has his own beliefs & his followers - they'll buy his book if they agree.

Personally I think Blaser's are "Butt Ugly" but even I am going to eventually give in and purchase one sometime soon as they are one of the most practical, versaltile & consistent rifle packages around. They pack down into a tiny case & almost allways trackdrivers right out of the box.

---

I have never considered them to be ugly? But if ya get one, eventually you will look at it long enough and find it pretty sexy, as well as all the other stuff you said:D

Quote:

---

Originally Posted by R93

No worries sneeze I have just finished knawing on a wee buck skin matt for ya. I promise I will not Talk about pills.......I mean projectiles:D

---

MMmmmm buckskin softened with drool normally reserved for blasers . Sounds cosy.

Quote:

---

Originally Posted by LJP

like others a few topics I'd have to "agree to disagree" on. At the end of the day he has his own beliefs & his followers

---

Thats sounds about right.
Actually this thread makes me think of the "which calibur" threads, where guys that are a little newer to the game will promote their first one as the best one to get.

So what pills are you loading these days sneeze? :D

Got a mooring sorted as well thanks mate. You should come up for a day and chase some snaps with me. I will need all the help I can get:thumbsup:

Quote:

---

Originally Posted by R93

So what pills are you loading these days sneeze? :D:

---

Diclofinac for a few crushed ribs.

Quote:

---

Originally Posted by R93

Got a mooring sorted as well thanks mate. You should come up for a day and chase some snaps with me. I will need all the help I can get:thumbsup:

---

Cool, Yeah Ill be about . Fishings not been flash yet but can sort a feed of mussels off the farm so you wont go hungry.

Ha Ha I will probably struggle to catch those as well

i think hes doing something great for shooters, he got a lot of info on his site for free. if your just starting out its a great place to check out.
its like everything that people tell you, you listen then make up your own mind or try what you hear to see if it works for you.
sure theres allways someone who disagrees with what they hear, and you would be a dumb ass to believe everything your told without making up your own mind.
but at least hes giving you something to work with or think about.
i think its silly to put him down, if theres somethings you dont agree with.
i think greg murphy is past it as a race car driver. but id still take driving lessons from him, and work with what i think suits me.