Thread: 22-250AI

Cheers. This is what the gunsmith said....
"I am not 100% happy with the way the chamber came out. The problem is that it transpires that the factory chamber was WAY off centre, and while I have done my best to set the barrel back 0.100” or so and dial in the throat area of the bore to get the throat section a bit straighter and better aligned, it is better, but still not 100% perfect".

I'm going to fire form my brass n try it out for accuracy, but am planning on a new barrel.

Originally Posted by BRADS

I had a high end custom gun from a central North Island builder that had a un straight chamber.

And if he didn't put it right he should be named. Don't be shy.
Probably the same one that told me it was $65 for a quote for a custom rifle.

Anyway, Welcome aboard mate!

Originally Posted by bully

And if he didn't put it right he should be named. Don't be shy.
Probably the same one that told me it was $65 for a quote for a custom rifle.

I wasn't being shy mate I thought it was obvious I was talking about NZ Hunter.