It is Nitrided :)
Printable View
Attachment 65973permatrim for the new motor:thumbsup:
So what did you see @Kiwi Greg?
Back on track again.
Going to have to learn a new system now :)
http://i1004.photobucket.com/albums/...psuaiasehe.jpg
This mornings effort, more happy clients right around the corner :)
http://i1004.photobucket.com/albums/...pscshjnzb5.jpg
We have already had that discussion......
His stuff is perfect, everyone else not so much......
I have given up & just want to get it back, absorb/lose $2k & move on....
I'm lucky that's bugger all money compared to some I know of .....
The industry & the world is an extremely small place....some Guys just don't understand that....:ORLY:
Some more very nice 6.5 & 30 cal cut rifle barrels this morning
http://i1004.photobucket.com/albums/...psemtsmndt.jpg
Bartlein & Proof Research :cool:
Todays arrivals, finally...customs....:(
6mm Krieger Benchrest barrels, two are sequential sisters :cool:
http://i1004.photobucket.com/albums/...pstzoc1iap.jpg
Nice. Have Krueger changed their barrel making process lately?
Some new Kreigers used at NRA not shooting as well as they use to
Goodness knows, could be a number of things.
One is a "test" barrel because its the "wrong" twist "apparently"
I got some Kriegers because they are "supposed" to be "better" than the 6mm Bartleins (which are sitting in customs).
Funny you talk to someone else & they say the opposite :P
I guess time will tell, 6 months until the World Benchrest Champs, I guess I can wear out a few barrels before then :thumbsup:
Finally got some 180 ELDMs, shame the 147s won't be here until July :(
http://i1004.photobucket.com/albums/...psx6hutg02.jpg
Some nice new & old shiney brass today :)
http://i1004.photobucket.com/albums/...psv7bgpwwg.jpg
It will be interesting to see if the small primer Lapua is an improvement over the excellent Hornady & Norma 6.5 Creedmoor brass
How much higher pressure could you run those Creedmore than standard LR primer? Much of an advantage?
Especially liking Saturday deliveries :thumbsup:
http://i1004.photobucket.com/albums/...ps4vmwgtor.jpg
1-8 7mm Bartleins, 1 x #3B & 3 x #3 sequential numbers too :)
http://i1004.photobucket.com/albums/...ps8nvme4ln.jpg
Nice & shiny :cool:
Lots of work to do this weekend to get two rifles going for next weekends competition :)
Those barrels look very nice I'm picking one of those is for me :D
Nice I'm looking forward to this one :cool:
I bet it's frustrating for sure
A couple of excellent XLR chassis this morning :)
http://i1004.photobucket.com/albums/...psa8xhpknm.jpg
A few nice Krieger, Bartlein & Proof Carbon Fibre barrels this morning :)
http://i1004.photobucket.com/albums/...psyerar9q4.jpg
Any spare 1 in 8 barrels?
Can do swap for 26" No5 7mm SS 1 - 9 Kreiger ?
Another Proof Research & Bartlein amongst some Krieger barrels yesterday morning.
http://i1004.photobucket.com/albums/...psdthhcmmy.jpg
More shiny bits this morning :)
http://i1004.photobucket.com/albums/...psb1dcgfkw.jpg
Very nice custom 338 Lapua Magnum bolt face Defiance, Ultralight, at 800 grams, it's lighter than a LA Rem 700, very very slick :cool:
Pardon my ignorance @Kiwi Greg but what's a stole panda? They look like solid actions? Ar they bench rest?
Going back to a post on here a couple months back. Have you had a chance to play around with some loads in the 6.5cm Lapua brass? Have you seen any advantages of the smaller primer pocket in terms of pressure or velocity?
Some very nice custom bushing dies this morning :)
http://i1004.photobucket.com/albums/...pspwnyzhah.jpg
Nice
What's a 338TM ?
338 Terminator, http://www.nzhuntingandshooting.co.n...minator-25380/
Big brother the 340 Terminator, http://www.nzhuntingandshooting.co.n...minator-22923/
Was using Redding dies although they do a great job, custom ones are better :)