Thread: Terminator Products calibres

Originally Posted by Kiwishooter

Greg what calibers do you have reamers for? Are you doing the gunsmithing (chambering/fitting action, truing) yourself? Also what is the accuracy guarantee??

I have reamers for or on the way for.
224-204, 244-204, 6.5mmSaum, 280Ai, 30-280Ai, 7mm-375R & 30-375R long for 700s & short for T3s, 338 Edge, 338 Norma, 375 Lil'Terminator.
I also have access to many more calibres.
I get gunsmiths to do the metal work.
I do the bedding, tuning, load development & accuracy work.
I consider 0.7 moa at 100 to be minimum acceptable accuracy, all rifles will achieve this & be sent out with targets.
Obviously the lighter, larger calibres are harder to control/shoot than the smaller ones.
The 338 Edges I have sold have all shot sub 1/2 and better.
All the 280ai & up calibres will have a Terminator brake fitted as standard if required.
Fluted bolts & barrels are also a standard feature.
Tikkas will have Limbsaver recoil pads with SS screws & a half bolt feature as standard.
The 700s will have alloy bolt shrouds & lightweight firing pins as standard.
20moa alloy EGW & Weaver Tactical rails are standard on the 6.5 & greater calibres if required.
Various aftermaket stocks are available.