I thought I would start a thread to put some unsolicited testimonials in :)
Printable View
I thought I would start a thread to put some unsolicited testimonials in :)
25/05/2012
Hi Greg,
I now have your brake on the edge, the difference is a at least half the recoil of the ssr brake and hre can,
I would have no trouble recommending them to anyone.
Now if you could just make them quiet.....haha
Thanks Duncan.
22/03/2012
I have put one of Greg's T3 Brakes on my new Sendaro 300 - works amazingly well.
1st shot i went bloody hell and the two people behind me went bloody hell - no recoil and LOUD :thumbsup:
1st muzzle brake that i have had - very impressed - able to see bullet strike on a wallaby on the weekend at 347 metres with 190 bergers.
24-06-12
Got my rifle back from gunworks the other day and shot it Sat morning and today.Still wondering where the recoil has gone :D
I'm wishing I'd kept my Titanium saum now,even with a vias brake it was still a pig of a thing to shoot!
Had a steel shoot today,only had 20 rounds for the 7mm mag as I only sighted it in and found a load with the Amax yesterday but still managed first round its at 730yrds 775yrds and 1000yrds and the T2 had a good hand in that I reckon plus I covered anyone next to me in snow haha and everyone else knew when I had fired :thumbsup:
24-06-12
Just shot the t3 on my 338 TRG with the terminator T3 and noticed a significant improvement over the factory sako brake so am very impressed thanks kiwi greg!
I will forwarding this brake on to a couple of TRG lads to try as well so watch this space!
27-05-12
I had a go with gregs 7mm mag down the range yesterday with his 7mm brakes which I think he is in the final stages of perfecting and it certainly made the sps rem mag a walk in the park when we screwed the brake on. One of these will certainly be on my shopping list shortly for my 7 pound all up 280 AI.
My shoulder highly recommends them ;)
Had a T2 fitted to my 7mmRM TikkaT3 a couple of weeks ago by Scott Trail of SSRNZ. Test fired it on Sunday and have to say I'm very impressed. Certainly knocked the recoil down to where I will be able to observe hits myself. An unscientific estimation puts the felt recoil at about the level of my 243 shooting 100 grain projectiles at 2900 fps. This is from my 7mmRM launching 162 grain SST's at 2970fps. The muzzle blast is as you would expect significantly increased, but ear plugs prevented any ringing of the ears. I would have no hesitation recommending both the Terminator T2 brake and Scott of SSRNZ. Scott turned the two 7mmRM's around in six days as promised. Am seriously considering having Scott fit a T2 to my Winchester Coyotee in 308 to improve the post shot sight picture.
PS - have now ditched the Limsaver pad on the Tikka for the original Tikka factory slab of rubber (less bounce of the shoulder) and the rifle still sits on target after the shot.
Hi Greg re T2
Wow thats the first I'v been able to see hits on the plate at 740 yards,no worries at 1020.
Couldnt really tell the diference from 250's and 300's makes the DE ones look shit.
Sick as bro Ha Ha Thanks Greg .
Cheers Chris
Hi Greg. Just thought I'd let you know how the brake went on the 7 Mag Holy crap. I was hugely impressed! Like shooting a 243 maybe. My dad who is
78 had a blast and he was impressed also. Certainly tamed her down.
I'll give anyone I know who is thinking "muzzle brake" a nudge in your direction.
I'm well happy, cheers
Adrian
Hi Greg,
I purchased a T3 from you a few months ago to fit my tikka 300wm. Just letting you know I am very pleased with the performance of the brake. It really is fantastic, the gunsmith who fitted it says it's the most of effective brake he's ever seen! Thank you very much!
Many Thanks,
Chris
Hey Greg,
Just thought I'd let you know I got that T2 muzzle break fitted (to my Sako 300 Win mag ) and took it to the range the other night and wow! It is bloody amazing! It's like shooting a water pistol there's so little recoil!
Cheers
Brad
Hey Greg
Had my first shooting last week. Your brake rellay rocks! It’s so efficient. Now a .338 fells like .308 in recoil.
Thanks again for the easy transaction!
Best regards
Stefan
Didnt even spell check it for him Greg :D
Thank you very much Greg, your brake is fantastic,
Alex
Awesome products. Love my T3 on my Savage 111 LRH in .338LM. Now that I see the T4 though I'm getting tempted to put on that big boy and smooth things out even more. However, I'm just getting picky in my old age. The T3 allows to keep my eye on the target for complete follow through. Never thought I would be able to accomplish that. Keep up the great work. I recommend these to everyone, and I rarely recommend anything......Doc Tari
Thanks for you help. FYI, your quality of work is second to none. You make an awesome brake!
Dan
Hey guys
Just wanted to send a picture along of my new T3 Terminator just back from my gun smith can’t wait to test it out.
Thanks for the great product
http://i1004.photobucket.com/albums/...psdb6fef6a.jpg
Hi Greg,
Scott here again,
Mate the T2 and T3 breaks I bought off you earlier in the year work wonderfully, so well that I would like to purchase another T2 break off you.
Could you please send me a quote for a Stainless T2 break with a 28 TPI thread, its for a 7 mm if that makes a difference, and could you please send me your bank details again so I can transfer the money right away.
Cheers Scott.
I'm running a t5 terminator on my Cheytac and it works a treat . I would totally buy one again . Makes the big girl a dream to shoot.
Hi Greg.
I just wanted to say you've designed a great brake. After nine months of working away from home I finally sighted my rifle in after the brake was installed. It performed beautifully. I was able to watch my second round hit a milk bottle at 635 m today. Keep up the good work. It's like a new rifle with the T3 on it.
I had a new barrel and custom suppressor fitted to my 7mm WSM a few years ago for the purpose of long range goat shooting. To be fair it worked pretty good for maybe 10 shots then as it heated up it went to hell. So I took it off and fitted a full F-Class barrel in the hope the additional weight would help with recoil and keep me on aim from shot to shot. Yes this worked in the perfect world but out in the field you can never guarantee your rest. So I relented and brought one of these noisy muzzle blasting brake things.
My gunsmith recommended a Terminator, it was a spur of the moment thing I had done no research in too this and simply agreed.
Well yep there is certainly noise but not what I expected. As for the blast wave there isn’t any really as the exhaust is directed back and not at the ground. I load pretty hot and the WSM drives the 180 Berger @ 3170 and the recoil is very noticeable, however with the Brake fitted my 8 year old fires it no problem at all and nick named it the cannon. I can now fire in almost any position and watch the bullet splash. My accuracy was completely unaffected and I still shoot the same load but my point of impact did shift 1.5moa down and 1 moa left. I have spent considerable amount of money in search of better accuracy over the years but now consider the Terminator bake to be the smartest investment I have made to date and now want one fitted to my .284.
Hi Greg, I bought a T2 muzzle brake from you about 2 months ago and wanted to let you know how happy i am with it. Your customer service in purchasing was second to none and the brake arrived within 5 working days to Australia. After a few delays I got the brake fitted by my gun smith here and it looked perfect. It almost looked factory fitted.
The brake is fitted to my tikka t3 super lite in 308W. Without the brake the recoil was pretty harsh as the rifle is very light at 2.9kg. With the brake fitted its on par with a 223 or my 17hmr. A fantastic product which I have recommended to all my shooting friends. Very happy with my purchase!
Regards
Andrew
Hi Greg. Just a quick note to tell you the muzzle arrived today. Looks great. Ill get it fitted this weekend. And take some pictures of this on my lovely tikka. Thanks again for the fantastic product and service. I'm sure ill be adding another to my collection when i get a .338 or .50 cal. I saw another guy at the range a few weeks ago sporting one of your muzzle brakes on an amazing desert tactical bulpup which i got the chance to fire a couple of rounds in 308 and it was amazing. It really made up my mind on your brakes. Again thanks for the quality product.
Regards, Alex.
Hey Greg,
Had the 338 Lapua out for a blast today and it's a lot more enjoyable to shoot with the T3 brake. Used to have a sore collarbone after 20 or so rounds but no longer have that issue. Was nicer to shoot than my suppressed 308. Thanks again really impressed with it.
Regards,
Dan.
Can't say I own any muzzle brakes myself, but I videoed a guy at a shoot on Saturday with one of Greg's brakes on a Sako M10 in 338 Lapua.
Good prone technique is shown here but given the weight of the M10, the muzzle brake was certainly impressive! Definitely anti-social but impressive recoil reduction!
Greg can confirm but I think it is an older T3 design?
https://www.youtube.com/watch?v=sSYRMvJXTjg
https://www.youtube.com/watch?v=sSYRMvJXTjg
Hi Greg
WOW – big difference in recoil the TE has over the Sako
Thanks again,
David
Hi Greg,
As of our conversation a few mins ago I would like to order another T3 brake from you.
Cheers Justin
Oh and btw, I love the last one I got for my 300wm. It’s an awesome bit of kit :)
http://i1004.photobucket.com/albums/...psvecry1ru.jpg
Just thought I would flick ya a pic
Shooting with .300wm / 200gr sierra's / 78gr powder
Kicks like a .223
Happy customer!
Hi Greg,
T3 brake is awesome, no recoil and no muzzle jump.
Perfect.
Thanks Sam
Hi Greg
Got it, (T2 Terminator Muzzle Brake) fitted it, works a great THANKS !
Cheers Paul
Awesome thank you!
BTW, we used the last T2 on a 7mm rem mag build which was quite light and heavy on the recoil, the T2 did its thing and its like shooting a .223 now lol
Awesome stuff!
Thanks Luke
G'day mate,
Just letting you know i received the brake.
I'm really happy with it, it looks great too.
Pleasure doing business with you.
Can't wait to try it out.
Cheers, Mitch
Hi Greg,did a 1000yds snap shoot yesterday with the T E Terminator,as it happens I equalled my PB and finished joint 1st,your muzzle brake is great,am really glad I bought one,atb Neil
I just wanted to compliment you on your videos of muzzle brake testing. They make it pretty easy to see the relative effectiveness of most of the top brands and who is talking bullshit and what works. I ordered a T3 last night after viewing the videos. If this brake works as advertised on current 338 Lapua AI project. I will swap the brake on my Cheytac for a T4. Thanks Dwight
Hi Greg
The TE brake arrived, fit and finish is top notch. The POI was absolutely minimal, thanks for a great product
Thanks
Carl