Thread: .22 Delisle Carbine Build (Pic heavy)

Originally Posted by Tooks

Its just ABS

What's the service life of the abs? A certain amount of rounds or just until it's not so quiet anymore?

Originally Posted by Russian 22.

What's the service life of the abs? A certain amount of rounds or just until it's not so quiet anymore?

The blast baffle is about 20'm thick. I have put about 1000 rounds through one of my ABS suppressor s with no visible wear

Originally Posted by Tooks

The blast baffle is about 20'm thick. I have put about 1000 rounds through one of my ABS suppressor s with no visible wear

Is that 20 thousandth of something or just 20 mm.

That's quite good wear? What sort if plans did you use or was it just off a drawing off the Web?

And are the baffles hole less until the first bullet is fired like the welrod or do you drill a 22. Sized hole for the projectile?

Sorry its meant to read 20mm. Each baffle is printed with a 7mm hole in it. The baffle stack is all of my own design.

Originally Posted by Tooks

Sorry its meant to read 20mm. Each baffle is printed with a 7mm hole in it. The baffle stack is all of my own design.

Thanks.

Looks like the local libraries 3d printer will be getting used a bit by me in the near future.

Originally Posted by Russian 22.

Thanks.

Looks like the local libraries 3d printer will be getting used a bit by me in the near future.

No worries mate, if ya have any other questions just ask.

Originally Posted by Tooks

No worries mate, if ya have any other questions just ask.

Sweet as. It looks really well made. 👍