Thread: DIY parkerizing

Originally Posted by canross

Just saw you've already got the PID with thermocouple... still pays to know that the phosphate solution is at the proper temp everywhere for even finish. I realize this' a cheap project, but a multi channel PID with multiple thermocouples and heater elements would be very cool.

That would be a cool setup. I was planning on gently stirring the tank(no splashes) until the PID controller had settled to a constant temp before immersion of the part.

I have an old machete that might get tested before any gun part, or some old tools to test the mix out.

Sent from my SM-A505GN using Tapatalk