Thread: Progressive press - Bullet collator

What's the OD of the tubular wall? Could be made from PVC pipe?

What does 6 inch / 155mm pipe cost per metre?

In theory if I alter a dimension in CAD its reflected in the part, however sometimes the result is, um totally wierd....

The OD is 158mm with a 3mm wall

The wall is a 22 hour print using 70.5m of filament, so the cost is $7.34 to print incl power.

When the print is finished though its "pre-drilled" and bolts right on.

Originally Posted by steven

What does 6 inch / 155mm pipe cost per metre?

In theory if I alter a dimension in CAD its reflected in the part, however sometimes the result is, um totally wierd....

The OD is 158mm with a 3mm wall

The wall is a 22 hour print using 70.5m of filament, so the cost is $7.34 to print incl power.

When the print is finished though its "pre-drilled" and bolts right on.

That's pretty close, so a small scale down from 158mm to 150mm.. I got given a few offcuts, 1 is about meter long so @stretch can go crazy with that