If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
On the topic of derusting delicate/historically valuable stuff, have found Evaporust to be excellent for derusting delicate or complicated items: https://www.supercheapauto.co.nz/p/e...re/354057.html
It really comes into its own on stuff that's delicate or you don't want to risk with acids or abrasion from sandpaper, wire brushes etc. Usually I degrease parts with a solvent, clean away dirt and coarse rust with a plastic brush and scraper, then toss everything in a bucket of the stuff for a day giving it a stir a few times. Usually that's enough, though I've left an old percussion barrel with seized plug in it for months and the plug came free at the end. Parts come out grey with a soap film to stop flash rusting when drying. The soap is water soluble so can be washed off when it comes time for surface prep. The solution weakens with time and use, but it's not a big deal in the grande scheme of things.
Also helps that it doesn't give you headaches, can't eat your skin/eyes/tools, light on fire, or destroy your parts if you leave them in there
I use it to derust old car bits, a bit spendy but does a good job and isn’t as toxic as other stuff.
For those with access to it you can use a 1:2 mixture of molasses to water to safely derust stuff, takes a wee while but it does work and again not toxic.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks