You've got a grinder,French it,fill the gap with "no more gaps".9mm aint got that much recoil:D
Printable View
Yup, after all the running around finding out what you should do you drop the ball.
That will take some fixing. Or do the thing an architect does when he messes up and it doesn't look as good as envisaged, ... suggest you plant a tree in front of it.
It'll live.
All done
Attachment 19418
Right stage 2,go to Repco and buy some Frostplugs to fit down the barrel,center dill them to 10mm,and drift them down to the 9mm insert.once you figure out what a frostplug is you'll work it out.
http://www.kerzan.co.nz/dbimages/sub...c35f8c1c9e.pdf
Toby what do you call that colour? And don't you be telling me Mauve.
Link added
Haha! it's safer then if I go poking things in the barrel though I was thinking about putting the washers and springs into a ali tube then putting that whole thing in the barrel so its easy to remove. Once I know for sure the bullets are going to fly out properly then I'll have a think about though it sounds like a lot of work
The picture makes it look an extremely dark iridescent green.