Not enough coats of black ?
Printable View
Not enough coats of black ?
Don't use springs to separate the washers use ali tube. But that frost plugs idea is even better.
http://youtu.be/ytllVexL31E
mark 2
MadJon bet me to it but yea just give the welds a grind then chain saw file then wet and dry around the file.
Bit of silicon in the sides let it fully cure and paint. It ain't coming off.
As for internal suppressor i would be goin for more than 10mm holes, you don't know how well it the insert will align.
Id go more like 12-13mm. To be on the safe side.
It's a bit rough around the edges but it'll do me for now. I think those frost plug ideas drilled to 12-13mm as VC says using ali tube like GM says would make a decent one. Can call it the mad gadgey cam suppressor :D
good work Toby - a project is a project and you learn something everytime. Looks ok to me if it's functional who cares, you even look to have a -20moa rail on it ;-)
Shot this thing today. It's the shit, so much fun. Hitting A4 at 20m but only just though I think the red dot isn't helping. Still awesome mate loves it though think he loved the wsm after he shot that
Well it is a good thing you survived the exercise Toby. A4 at 20 metres huh?
Mate shooting it. Looks pretty sweet if I do say so myself. I'd show the target but its just holes everywhere in the paper some hit side ways haha.
Attachment 19476
I'd suggest you dont try suppressing the inside of the barrel based on the test fire results!. As the insert isn't rifled there is nothing to stabilize the
projectiles hence the tumbling and hitting the target sideways?. If you're happy with the rest of the build, why not investigate getting a short piece of barrel
blank made up to take the place of the existing insert?
Yeah the suppressor idea went out the window when I saw the target. I don't think I'll do much to this gun again but I want another one with a rifled barrel